[ SHOOTINGMENU]MENU]

Setting the shooting menu (➝p.67)

Adjusting color balance ([TWHITE BALANCE])

Available Shooting mode: s,

(➝p.54, 55)

Adjust the color balance based on white to suit the color of the ambient light around the subject.

WHITE BALANCE

AUTO

AUTO: Automatic adjustment6: Shooting outdoors in good weather7: Shooting in shade9: Shooting under Daylight fluorescent lamps0: Shooting under Warm White fluorescent lamps-: Shooting under Cool White fluorescent lamps8: Shooting in incandescent light

MEMO

•In AUTO mode, the correct white balance may not be achieved for subjects such as close-ups of people’s faces and pictures taken under a special light source. Select the correct white balance for the light source.

•When the flash fires, the white balance setting for the

flash is used. Consequently, to achieve a particular effect, the flash mode should be set to CSuppressed flash (➝p.61).

•The color tones may vary depending on the shooting conditions (light source, etc.).

74

•We recommend playing back images after shooting to check the color tones (white balance).

•Explanation of Terms “White Balance” (➝p.154)

Changing the quality setting ([ QUALITY])

Use this menu to specify the image size (number of recorded pixels).Select the quality setting for the scene being shot.ZQuality settings in Photography mode

Quality mode

Sample uses
iF (3264 × 2448)

Printing at up to 10R (25.4 × 30.5 cm/

iN (3264 × 2448)10 × 12 in.) / A4 size
%For better quality, select iF(3072 × 2176)4(2304 × 1728) Printing at up to 6R (15.2 × 20.3 cm/ 6 × 8 in.) / A5 size2(1600 × 1200) Printing at up to 4R (10.2 × 15.2 cm/ 4 × 6 in.) / A6 size`(640 × 480) To use for e-mail or web site