FujiFilm Z100fd 54

Setting the Shooting Mode

	[sMANUAL]			MEMO
	[sMANUAL]			This mode helps to avoid failed shots that may occur

	Set the Photography functions to manual to easily control
	Set the Photography functions to manual to easily control			when using other Shooting modes when taking a picture
	yourself.			against the sun, etc.
	Photography functions:			CAUTION
	• [S EXP. COMPENSATION] (➝p.73)			CAUTION
	• [S EXP. COMPENSATION] (➝p.73)			•	Flash fires automatically. Do not use this mode at
	• [T WHITE BALANCE] (➝p.74)			•	Flash fires automatically. Do not use this mode at
	• [	AF MODE] (➝p.77)			situations where the flash cannot be used.
				• When there is insufficient space on the Memory Card or
	[AUTO]				internal memory for 2 shots, this mode cannot be set.
	[AUTO]			•	Continuous shooting is disabled when setting	.
				•	Continuous shooting is disabled when setting	.
	This is the easiest mode for providing crisp and clear
	shots.
	shots.			[	NATURAL LIGHT]
	Use this mode for ordinary photography.			[	NATURAL LIGHT]

				This mode produces
	[	NATURAL & d]		beautiful images that retain
				the natural ambience when
	This mode shoots 2 images continuously without flash			the natural ambience when
	This mode shoots 2 images continuously without flash			shots are taken in low-light
	and with flash. Shooting with flash allows you to take a			conditions.
	picture of a main subject brightly. Shooting without flash			conditions.
	picture of a main subject brightly. Shooting without flash			This mode is also ideal for
	produces beautiful images that retain the natural			This mode is also ideal for
	produces beautiful images that retain the natural			shooting indoor or situations
	ambience. This mode is useful for shooting 2 different			where the flash cannot be
	types of pictures at the same time.			where the flash cannot be
	types of pictures at the same time.			used.
				used.
				Camera sets the high-sensitivity setting when selecting
				the Natural light mode. This mode is effective for reducing
				camera shake and moving-subject blurring when taking
				pictures in low-light conditions.
				CHECK
				Flash cannot be used in the Natural light mode.

When pressing the shutter button, first picture is taken without flash and next picture is taken with flash. Always 2 pictures are taken per 1 shot.

Do not move the camera until the shooting ended.

54

Contents

OWNER’S MANUAL Warning IMPORTANT EC Declaration of Conformity Disposal of Electric and Electronic Equipment in Private Households Disposal of used Electrical & Electronic Equipment product In Countries outside the EU: Contents Setting the language, date, and time Using Intelligent Face Detection/Red-eye Removal when taking pictures taking pictures [ PLAYBACK MENU] Sending and receiving images Transmitting and saving blog images Setting the [PLAYBACK MENU] Setting automatic playback Usable Memory Cards About this Manual ZNote ZUsing the Wheel Dial Changing folders (➝p.27) Accessories Included Camera Parts and Features Example of LCD Monitor Text Display Charging the Battery Z<Charging Indicator and Statuses Charging Status Action Battery not loaded Loading the Battery 3 Close the battery cover To remove the battery MEMO Loading the Memory Card Protection Switch How to replace the Memory Card Loading the Memory Card •Operation of this camera is only guaranteed when it is •See p.133 for information on the xD-PictureCard and the internal memory •See p.152 for information on the standard number of available frames ZAbout internal memory Turning On and Off 1 [] screen appears when turning the camera on 2 Set the date and time 3 Change the date format Date format Correcting the Date and Time Selecting the Language Setting Silent Mode Taking Pictures (AUTO Mode) Holding the camera correctly Brace your elbows against your sides and hold the camera with both hands Do not cover the lens or flash with your fingers T button (Zoom out) 5 Press the shutter button fully Double beepClick AF frame •Not focus on the subject No sound Flash When selecting a slow shutter speed that will cause camera shake See ZIndicator lamp display Indicator lamp Available Shooting modes: AUTO, , , H, /, , , , , , s OFF When there are multiple people in the frame Intelligent Face Detection CHECK [ FACE DETECTIONbREMOVAL ON] Available Photography modes: All (except for ) Subjects not suitable for Intelligent Face Detection 32For such subjects use AF/AE lock (➝p.33) Camera shake and blurring may remain depending on scenes 1 Move the camera slightly so that one of the Using subjects is in the AF frame 2 Press the shutter button down halfway to focus on the subject •AF/AE lock can be applied repeatedly before the shutter is released Subjects not suitable for autofocus Very shiny subjects such Fast moving subjects as a mirror or car body •Subjects photographed through glass •Subjects that do not reflect well, such as hair or fur Select the LCD monitor display Press DISP/BACK to change the LCD monitor display Text displayed Framing guideline displayed Viewing the Images ZSetting the password ZInputting password Intelligent Face Detection 1 Zoom in / Zoom out W button (Zoom out) Zoom bar 2 Display another part of the image Navigation screen (Current displayed image) Page •The [PRIVATE] folder with a password set cannot be displayed In sorting by date mode (➝p.36), you can view all images taken on the same day AMove the cursor (colored frame) to the selecting frame In sorting by date mode, images in one folder are displayed in order of date To display all images in the camera, use micro thumbnails playback Page Playback mode (➝p.36) Page erased the frames (files) before erasing them (➝p.87) • If [DPOF SPECIFIED. ERASE OK?] or [DPOF OK again to erase the frames (files) ASelect [OK] Moving or Copying the Images Page Moving or Copying the Images DPress MENU/OK to move all the frames (files) When ASelect [COPY] BPress MENU/OK to open a folder selecting screen Page Page Using the Shooting Functions — Procedure of Setting ZSpecifying functions using [SHOOTING MENU] Setting the Shooting Mode Page <Setting frames You can select 4 types of frames: ASelect [AUCTION MODE] from the top menu BShow a frame selecting display CSelect the frame Use this mode for shooting evening and night scenes A picture is taken with a slow shutter of up to 3 seconds Use this mode to shoot fireworks It is effective for taking more vivid shots of fireworks with a slow shutter •Flash cannot be used in the Fireworks mode Page Page eMacro (Close-up) dSetting the Flash (Intelligent Flash) Available flash modes in Photography modes d Setting the Flash (Intelligent Flash) When [ FACE DETECTION bREMOVAL ON] is set: Effective flash range (: [AUTO]) Wide-angle: Approx. 70 cm to 3.6 m (2.3 ft. to 12.8 ft.) Telephoto: Approx. 70 cm to 2.9 m (2.3 ft. to 9.5 ft.) *Self-Timer Self-Timer 2 Take pictures in selected time Using the 2-second self-timer •To stop the self-timer,once it has started running, press DISP/BACK •Any of the following cancels the self-timersetting: Available Photography modes: [AUTO], , , H /, , , , , , s 1 Set the self-timer The self-timersetting changes each time you press * (o) OFF 4 Take pictures in selected time Using [SHOOTING MENU] ZList of SHOOTING MENU options Menu Functions Settings Factory Shooting mode: [AUTO], , H Shooting mode: s Shooting mode: SHOOTING MENU] Setting the shooting menu (➝p.67) •The speed of continuous shooting varies depending on the shutter speed Available Shooting modes: All (except for , ) (➝p.54 – 58) Shooting continues as long as Page Available Shooting mode: s (➝p.54, 55) Guide to compensation AUTO: Automatic adjustment 6: Shooting outdoors in good weather 7: Shooting in shade 9: Shooting under Daylight fluorescent lamps 0: Shooting under Warm White fluorescent lamps Area shot and quality setting Area shot excluding % Area shot with % [AUTO]/1600/800/400/200/100/64 Use this menu to specify required color tone It is effective for taking vivid shots or black and white shots FinePix COLOR settings [p-STANDARD] are set to standard Available Shooting mode: s(➝p.54) (When Intelligent Face Detection is turned OFF) Use this mode to specify focusing mode that best suits the subject : CENTER : MULTI Page [PLAYBACK MENU] [ PLAYBACKMENU]MENU] (Angle: up to approx.15°) •Make sure the receiving camera is turned on when transmitting image data 80on the printer type •Movie images cannot be transmitted Page MEMO Trimming Images MEMO Effect on images ASelect the frame (file) to save BPress (o) to save the image When saved blog images are played back Saved blog images cannot be rotated or trimmed Using [PLAYBACK MENU] Setting the playback menu (➝p.84) •To interrupt [SLIDE SHOW], press MENU/OK •You can select BGM during slide show •Scrap book view will select the size and position of the images automatically •The Auto power off function (➝p.111) does not operate during a slide show Use this mode to rotate an image and to display correct direction An image can be rotated only when playing back using FinePix Z100fd ESelect [ IMAGE ROTATE] FThe image rotating screen appears GRotate the image Press DISP/BACK to cancel rotating the image To protect or unprotect only the selected frame (file): Unprotected Protected (Fappears) ASelect the protecting/unprotecting frame (file) Press MENU/OK to protect all the frames (files) Press MENU/OK to unprotect all the frames (files) MEMO To stop the procedure midway Microphone time Select an image file with a voice memo. # appears on the LCD monitor (Setting the camera to wPlayback mode (➝p.36)) ZPlaying back voice memos Control Description [WITH DATEE] : The date will be imprinted on your prints [WITHOUT DATE] prints [RESET ALL] •When DPOF settings were specified on another camera •Prints of up to 999 frames (files) can be ordered on the same Memory Card •DPOF settings cannot be specified for movies Make sure to press MENU/OK when your settings are complete Page ZuPRINT ORDER (DPOF) W button T button (Zoom out) Page rRecording Movies 2 Record movies CHECK Recording movies rRecording Movies Press MENU/OK to open the top menu to select [SHOOTING MENU] ASelect CChange the setting ZQuality settings in Movie mode wPlaying Back Movies w Playing Back Movies •You may not be able to play back some movie files recorded on other cameras •Uncover the speaker. The sound is difficult to hear [U SETUP] [U SETUP] How to use the [SET-UP]menu (➝p.103) Setting Explanation Page Factory default FORMAT] Initializes a Memory Card or internal memory Select this menu to erase all the frames (files) Specifies the language used for LCD monitor [3 SEC]/[1.5 SEC]: The image appears for about 3 or 1.5 seconds and is then recorded [ZOOM (CONTINUOUS)]: The image appears enlarged. Use this mode to check details of image •[IMAGE DISP.] cannot be used when [hLONG PERIOD] (➝p.72) is set <CONT.> <RENEW *Formatted Memory Card or internal memory used for both A and B [RENEW] : Pictures are stored on each Memory Card beginning with a file number Frame number File number [CONTINUOUS]: The Dual Image Stabilization function is activated always at photography mode [SHOOTING ONLY]: Use this function to shoot enlarged images than maximum optical zoom scale ZZoom bar display ZSTANDARD ZPOWER SAVE ASelect the volume type BChange the setting CPress MENU/OK to confirm the setting Page Initialize (format) the Memory Card or internal memory for use with the camera YFORMAT: Internal memory \FORMAT: Memory Card 1 Use Time difference function 2 Move to [TIME DIFFERENCE] screen 3 Set time difference Available time setting Connecting to a TV Connecting Camera Directly to Printer — PictBridge Function Connecting Camera Directly to Printer — PictBridge Function PRINT setting To specify more PRINT settings, repeat steps Aand B CPress MENU/OK to display the confirm setting MEMO Printing with date APress DISP/BACK to open the menu BSelect [uPRINT DPOF] Connection Camera Disconnecting the printer Installation on a Windows PC Installation on a Windows PC 1 Install FinePixViewer as instructed by the on-screeninstructions Launching the installer manually ADouble-clickthe “My Computer” icon *Windows XP users should click “My Computer” in the “Start” menu Installation on a Mac OS 3 Double-clickon “Installer for MacOS X” 6 Install FinePixViewer as directed by the on- screen instructions 8 Launch “Image Capture” from the “Applications” folder 10Select “Other...” from “When a camera is connected, open” 12Select “Quit Image Capture” menu in the “Image Capture” menu Connecting to a PC •Auto power off is disabled during USB connection •Before replacing the Memory Card, always disconnect the camera from the PC •Always use FinePixViewer to transfer images with voice memos to a PC Always use the FUJIFILM AC Power Adapter •Make sure that the USB cable (included) is connected correctly and securely Connecting to a PC •You can only see images saved on a PC. Save images on a PC Proceed to “Using FinePixViewer” (➝p.127) CAUTION (Mac OS X) Note on disconnecting the camera •What is explained in “How to Use FinePixViewer” Example: Looking up slide shows Windows Software Macintosh System Expansion Option Accessories Guide •PC Card Adapter DPC-AD •CompactFlash™ Card Adapter DPC-CF • Waterproof Case WP-FXZ100(upcoming) •Soft case Using Your Camera Correctly ZHandling Memory Card MEMO Type M and H of xD-PictureCard •Type M FinePix Z100fd is compatible with Type M •Type H Warning Displays • The Memory Card format is incorrect • The Memory Card is damaged [\MEMORY FULL] The internal memory or Memory Card is full [YMEMORY FULL] Warning Displays • This file cannot be played back • The movie and image cannot be played back movie that was not recorded on this camera [TOO MANY FRAMES] DPOF frame settings be specified on the same Memory Card is DPOF settings DPOF printing cannot be used with this image an image that is not supported by DPOF • The image format is not transmittable • A movie can not be sent is displayed) • Transmission was disconnected during IR communication Troubleshooting Troubleshooting There is no battery in the camera Load the battery begin The charging ZShooting pressing the shutter button Cannot use the flash Set continuous shooting to OFF Set the flash mode to something other Page ZPlaying back ZConnecting ZOthers Camera malfunction may be caused temporarily reload the battery or reconnect the AC buttons on the Specifications Specifications Sensitivity AUTO/Equivalent to ISO 64/100/200/400/800/1600 (normal output sensitivity) Photometry TTL 256-zonesmetering White balance Fluorescent (Cool White), Incandescent) Self-timer Approx. 2 sec./10 sec Flash type Power supply separately) Guide to the number of available frames for battery operation Battery Type Number of frames Nominal voltage Nominal capacity Operating temperature Dimensions Mass (Weight) Quality setting Number of recorded Image data size (approx.54 MB) 16 MB Page Explanation of Terms FUJIFILM Digital Camera Worldwide Network FUJIFILM Digital Camera Worldwide Network Page Page Page Page Page Page Memo http://www.fujifilm.com/products/digital_cameras/index.html http://www.fujifilm.com/products/ digital_cameras/index.html ■ Handling the Battery *Conﬁ rm your battery type before reading the following descriptions 1Camera uses the Rechargeable Lithium-ionBattery ■Battery Features