FujiFilm Z100fd ATurn the camera on, [ PLAYBACKMENU]MENU], 80on the printer type, (Angle: up to approx.15°), BSelect the sending frame (file)

[ PLAYBACKMENU]MENU]

(Angle: up to approx.15°)

CPoint the infrared port on the transmitting camera directly at the infrared port on the receiving camera (➝p.12). Transmission distance is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.

DPress MENU/OK to begin transmission. When transmission is completed, [TRANSMISSION COMPLETED] will appear on the LCD monitor.

IR COMMUNICATION

CONNECTING

CANCEL

CAUTION

•Make sure the receiving camera is turned on when transmitting image data.

•If the image is 3:2 ratio, white lines may appear at the top and bottom or right and left of the print, depending

80on the printer type.

•Movie images cannot be transmitted.

•Images photographed with a camera other than FinePix Z100fd may not be printed or transmitted.

CHECK

•Refer to the manual provided with the receiving device for more information.

•When exchanging images with another Z100fd, images are saved automatically in the same folder as the transmitting camera.

Receiving the image data

Receiving the image data from a FUJIFILM digital camera is shown as an example here. You can receive data from another device in the same way.

IR COMMUNICATION

TRANSMITRECEIVE

CANCEL

ATurn the camera on.

BSelect the sending frame (file).