Manuals / Brands / Photography / Digital Camera / FujiFilm / Photography / Digital Camera

FujiFilm Z10fd MEMO, DATEE], display, CAUTION, [PRINT WITH, CPress MENU/OK, APress DISP/BACK to, display the setting, BPress nor oto select, MEMO Printing with date

1 166

Download 166 pages, 4.36 Mb

Connecting Camera Directly to Printer — PictBridge Function

Specifying images for printing

(PRINT WITH DATEE / PRINT WITHOUT DATE)

PICTBRIDGE

TOTAL : 00002

02 SHEETS

FRAME

OK SET

APress por qto display the frame (file) for specifying PRINT setting.

BPress nor oto set a value.

Up to 99 sheets are printed.

To specify more PRINT settings, repeat steps Aand B.CPress MENU/OK to display the confirm setting.

PRINTTHESE FRAMES

TOTAL : 9 SHEETS

YES CANCEL

DPress MENU/OK again to download the data to the printer and start printing the specified number of prints.

MEMO

Even if MENU/OK is pressed with total number of images set at 0 (zero), the screen printing once appears on the LCD monitor. Press MENU/OK again and printing starts.

MEMO Printing with date

				APress DISP/BACK to
		PICTBRIDGE		display the setting
				display the setting
				display.
	PRINTWITH DATE			display.
	PRINTWITHOUT DATE			BPress nor oto select
		PRINT DPOF		BPress nor oto select
				[PRINT WITH
				DATEE].
				CPress MENU/OK.

CAUTION

[PRINT WITH DATEE] is not available when the camera is connected to a printer that does not support date printing.

108

Contents

Page For customers in the U.S.A FCC Statement CAUTION For customers in Canada Be sure to read this page before using the software End User License Agreement Page Disposal of used Electrical & Electronic Equipment product In Countries outside the EU: Setting the language, date, and time Using Intelligent Face Detection/Red-eye Removal when taking pictures Using AF/AE lock Adjusting the shot composition Sending and receiving images IR COMMUNICATION]) Transmitting and saving blog images TRIMMING FOR BLOG]) Setting the [PLAYBACK MENU] Usable Memory Cards ZAbout marks CAUTION: CHECK: MEMO: ZUsable Memory Cards Page AShutter button BPOWER switch/Lens cover CFlash (p.51) DLens ESpeaker FIllumination lamp (p.100)/Self-timerlamp (p.55) GMicrophone HIndicator lamp (p.28) Iw(Playback) button JLCD monitor ZPhotography mode ZPlayback mode ZCompatible battery Rechargeable Battery NP-45(1) Terminals Indicator •See “Notes and Cautions” for information on the battery Charging the Battery Z<Charging Indicator and Statuses Charging Status Action 1 Open the battery cover CHECK Check that the camera is turned off before opening the battery cover •Do not apply force to the battery cover 2 Load the battery 3 Close the battery cover To remove the battery MEMO xD- Picture Card SD Memory Cards/SDHC Memory Cards They are operation-checkedat FUJIFILM Corporation. Manufacturer: SanDisk •The camera is not compatible with multimedia cards 2 Insert an xD-PictureCard Loading the Memory Card Protection Switch How to replace the Memory Card ZAbout internal memory When an Memory Card (sold separately) is inserted Ready When an Memory Card (sold separately) is not inserted • Power-ON • Power-OFF Changes between Shooting mode and Playback mode ALeave the lens cover closed • Close the lens cover 1 [] screen appears when turning the camera on 2 Set the date and time Turning On and Off 3 Change the date format APress por qto select the date format BPress nor o to set the format CAlways press MENU/OK after the settings are completed 1 Open the [SET-UP]menu 2 Display the [DATE/TIME] screen 2 Display the [] screen This section describes the basic operations Refer to p.41 for setting AUTO Mode 1 Turn the camera on AOpen the lens cover completely so that it will not move further Holding the camera correctly • Focal range Approx. 60 cm (2.0 ft.) to infinity • Optical zoom focal length (35 mm camera equivalent) • Max. zoom scale 3× •Not focus on the subject No sound 4 Press the shutter button fully Double beepClick Halfway pressed When the subject is not in the AF frame, use AF/AE lock to take the picture ZIndicator lamp display Indicator lamp Display Lit green Locking the focus Green frame Detection frame BPress the shutter button down fully to take pictures CHECK [ FACE DETECTIONbREMOVAL ON] When a picture is taken with [FACE Subjects not suitable for Intelligent Face Detection •The face is obscured by glasses, sunglasses, a hat, or hair •A person turned sideways, or who has their head tilted •The subject is too far away to recognize a face For such subjects use AF/AE lock •AF/AE lock can be applied repeatedly before the shutter is released Subjects not suitable for autofocus Very shiny subjects such Fast moving subjects as a mirror or car body •Subjects photographed through glass •Subjects that do not reflect well, such as hair or fur Select the LCD monitor display Press DISP/BACK to change the LCD monitor display Text displayed Position the main subject at the intersection of two lines Press w during shooting to change to Playback mode •When pressing w, the last image shot appears on the LCD monitor •When playing back images shot with a camera other than FinePix Z10fd, “” (present icon) appears on the LCD monitor CAUTION Still images viewable on FinePix Z10fd 1 Zoom in / Zoom out W button (Zoom out) Zoom bar 2 Display another part of the image Navigation screen (Current displayed image) ZZoom scales Quality mode Max. zoom scale Page the Page Page Erasing the Images/Movies Press MENU/OK to erase all the frames (files) 1 Select the Shooting mode 2 Specify the photography settings ZSpecifying functions using buttons ZSpecifying functions using [SHOOTING MENU] (MENU/OK button) Photography — Features Advanced Page Set the Photography functions to manual to easily control yourself Photography functions: •[EXP. COMPENSATION] (➝p.64) •[WHITE BALANCE] (➝p.65) •[ AF MODE] (➝p.68) <Setting frames Use this mode for shooting evening and night scenes A picture is taken with a slow shutter of up to 3 seconds Page Page Use this mode to take close-upshots Available Shooting modes: [AUTO] [AUTO] , s(➝p.45, 46, 48, 49) Press e (p) to select Macro mode. Press e (p) again to cancel Macro mode MEMO What is Intelligent Flash The Intelligent Flash feature is always used when shooting with flash The flash setting changes each time you press d(q) When [FACE DETECTION bREMOVAL ON] is set The flash fires as required by the shooting conditions Available flash modes in Photography modes When [ FACE DETECTION bREMOVAL ON] is set: s ✓ ✓ ✓ ✓ Effective flash range (: [AUTO]) Wide-angle: Approx. 70 cm to 3.9 m (2.3 ft. to 12.9 ft.) Telephoto: Approx. 70 cm to 3.4 m (2.3 ft. to 11.2 ft.) Available Shooting modes: All The self-timersetting changes each time you press *(o) The last displayed setting : The picture is taken after 10 seconds (: The picture is taken after 2 seconds 2 Take pictures in selected time Using the 2-second self-timer *Self-Timer Available Photography modes: [AUTO], , , H /, , , , , , , s 1 Set the self-timer The self-timersetting changes each time you press * (o) 4 Take pictures in selected time APress MENU/OK to open the [SHOOTING MENU] BPress nor o to select the menu DPress nor o to change the setting ZList of SHOOTING MENU options Menu Functions Settings Factory Shooting mode: [AUTO] , H Shooting mode: s Shooting mode: Setting the menu (➝p.58) Available Shooting modes: All (except for ., ) (➝p.45 – 49) All [SHOOTING MENU] Setting the menu (➝p.58) As long as the shutter button is held down, the camera Available Shooting modes: will continue to take pictures Page Available Shooting mode: s (➝p.45, 46) Guide to compensation AUTO: Automatic adjustment 6: Shooting outdoors in good weather 7: Shooting in shade 9: Shooting under Daylight fluorescent lamps 0: Shooting under Warm White fluorescent lamps Area shot and quality setting Area shot excluding % Area shot with % [AUTO]/1600/800/400/200/100/64 Use this menu to specify required color tone It is effective for taking vivid shots or black and white shots FinePix COLOR settings [p-STANDARD] are set to standard Available Shooting mode: s (➝p.45) (When Intelligent Face Detection is turned OFF) Use this mode to specify focusing mode that best suits the subject : MULTI Page APress wto set the camera to Playback mode (➝p.33) BPress (o) to open the [IR MENU] CPress nor o to select [ IR COMMUNICATION] DPress MENU/OK Playback [PLAYBACK MENU] CPoint the camera’s infrared port towards the front of the camera’s infrared port (➝p.11). Transmission • Movie images cannot be transmitted distance is about 5 to 20 cm (2 to 7.9 in.) within MEMO Trimming Images ASelect the frame (file) to save BPress (o) to save the image When saved blog images are played back Saved blog images cannot be rotated or trimmed Playback — Features Advanced Setting the menu (➝p.75) •To interrupt [SLIDE SHOW], press MENU/OK •You can select BGM during slide show •Scrap book view will select the size and position of the images automatically •The Auto power off function (➝p.103) does not operate during a slide show Use this mode to rotate an image and to display correct direction An image can be rotated only when playing back using FinePix Z10fd ASelect the frame (file) to rotate CPress nor o to select [ IMAGE ROTATE] To protect or unprotect only the selected frame (file): Unprotected Protected (Fappears) APress por qto select the protecting/ unprotecting frame (file) BPress MENU/OK to protect/unprotect the currently displayed frame (file) MEMO To stop the procedure midway ZSelecting COPY BPress q Copying the images to another Memory Card Page Page Microphone Remaining time GThe voice memo ends when pressing MENU/OK midway or 30 seconds pass To record your comment: press MENU/OK To rerecord the comment: press DISP/BACK The playback time appears on the LCD monitor along with a progress bar • When the image already has a voice memo ZPlaying back voice memos Control Description MEMO Playing back voice memo files W button Page [WITH DATEE] : The date will be imprinted on your prints [WITHOUT DATE] prints [RESET ALL] MEMO Canceling DPOF setting Make sure to press MENU/OK when your settings are complete To cancel all DPOF settings: Select [RESET ALL] in the [PLAYBACK MENU] (➝p.86) Press MENU/OK Zu PRINT ORDER (DPOF) 1 Set the camera to r Movie mode ZZooming the image 2 Record movies CHECK Recording movies rRecording Movies Press MENU/OK to open the [SHOOTING MENU] APress nor o to select [ QUALITY] CPress nor o to change the setting ZQuality settings in Movie mode Setting the camera to w Playback mode (➝p.33) Playback starts automatically The playback time appears on 30s the LCD monitor along with a progress bar •You may not be able to play back some movie files recorded on other cameras •Uncover the speaker. The sound is difficult to hear 2 Change the page 3 Change the setting [ SET-UP] How to use the SET-UPmenu (➝p.95) Setting Explanation Page Factory default FORMAT] Initializes an Memory Card or internal memory Select this menu to erase all the frames (files) Specifies the language used for LCD monitor [3 SEC]/[1.5 SEC]: The image appears for about 3 or 1.5 seconds and is then recorded [ZOOM (CONTINUOUS)]: The image appears enlarged. Use this mode to check details of image •[IMAGE DISP.] cannot be used when [hLONG PERIOD] (➝p.63) is set <CONT.> <RENEW *Formatted Memory Card or internal memory used for both A and B [RENEW] : Pictures are stored on each Memory Card beginning with a file number Frame number File number Use this function to shoot enlarged images than maximum optical zoom scale ZZoom bar display OFF Optical zoom: 3× approx. 2.5× ZSTANDARD ZPOWER SAVE ASelect the volume type BChange the setting CPress MENU/OK to confirm the setting Page Initialize (format) the Memory Card or internal memory for use with the camera FORMAT OK? Place of initialize ERASE ALL DATAY FORMAT: Internal memory \FORMAT: APress pto select [OK] 1 Use Time difference function 2 Move to [TIME DIFFERENCE] screen 3 Set time difference Available time setting Page 1 Connect the camera to your printer using the USB cable “ USB” appears on 3 The following screen appears on the LCD monitor after a moment “Specifying images for printing” Connecting Camera Directly to Printer — PictBridge Function APress por qto display the frame (file) for specifying PRINT setting To specify more PRINT settings, repeat steps Aand B CPress MENU/OK to display the confirm setting MEMO Printing with date Page Disconnecting the printer ZHard ware (software) requirements and recommended system requirement Recommendation CPU RAM Installation on a Windows PC 1 Install FinePixViewer as instructed in the Quick start guide Launching the installer manually ADouble-clickthe “My Computer” icon *Windows XP users should click “My Computer” in the “Start” menu ZHardware and software requirements Compatible Mac*1 Operating System Internet connection*3 3 Double-clickon “Installer for MacOS X” 6 Install FinePixViewer as directed by the on- screen instructions 8 Launch “Image Capture” from the “Applications” folder 10Select “Other...” from “When a camera is connected, open” 12Select “Quit Image Capture” menu in the “Image Capture” menu FinePixViewer Overview •Do not format the Memory Card in the camera on the PC •Use the Memory Card with images taken by a FUJIFILM Digital camera BConnect the camera to your PC using the USB cable (included) CPress wfor about 1 second to turn the camera on in Playback mode •Auto power off is disabled during USB connection •Before replacing the Memory Card, always disconnect the camera from the PC •Always use FinePixViewer to transfer images with voice memos to a PC Always use the FUJIFILM AC Power Adapter •Make sure that the USB cable (included) is connected correctly and securely Connecting to a PC •You can only see images saved on a PC. Save images on a PC Proceed to “Using FinePixViewer” (➝p.119) CAUTION (Mac OS X) Note on disconnecting the camera •What is explained in “How to Use FinePixViewer” Example: Looking up slide shows Windows Software Macintosh TV monitor (commercially available) Audio/Visual output USB PictBridge-compatibleprinter Personal Computer (commercially available) •xD-PictureCard • Battery Charger BC-45 •AC Power Adapter AC-5VX • DC Coupler CP-45 •PC Card Adapter DPC-AD •CompactFlash™ Card Adapter DPC-CF ZPlaces to Avoid Do not store or use the camera in the following types of locations: •In the rain or in very humid, dirty, or dusty places •Extremely cold places •Places with strong vibration ZHandling Memory Card MEMO Type M and H of xD-PictureCard •Type M FinePix Z10fd is compatible with Type M •Type H The table below lists the warnings that are displayed on the LCD monitor Warning Displayed Remedy The battery is low or completely out of charge V(Blinking red) • The Memory Card format is incorrect • The Memory Card is damaged [\MEMORY FULL] The internal memory or Memory Card is full [YMEMORY FULL] Warning Displays • This file cannot be played back • The movie and image cannot be played back movie that was not recorded on this camera [TOO MANY FRAMES] DPOF printing cannot be used with this image an image that is not supported by DPOF format [rCAN NOT SET DPOF] shot using a camera other than FinePix Z10fd Transmission was disconnected during IR Displayed for PictBridge ink • Refer to the user manual supplied with your printer ZGetting ready Matters Problems Possible causes Solutions Troubleshooting There is no battery in the camera Load the battery begin The charging ZShooting flash was charging pressing the shutter button The Cannot use the flash Page ZPlaying back ZConnecting ZOthers Camera malfunction may be caused temporarily reload the battery or reconnect the AC buttons on the System Model Digital camera FinePix Z10fd Effective pixels 7.2 million pixels Sensitivity Photometry Exposure control Scene position Picture stabilization White balance Self-timer Approx. 2 sec./10 sec Flash type Auto flash Power Supply and Others Power supply separately) Guide to the number of available frames for battery operation Battery Type Battery NP-45 Nominal voltage Nominal capacity Operating temperature Dimensions Quality setting Number of recorded Image data size Internal memory (approx.54 MB) Page Frame rate (fps) JPEG Motion JPEG Smear WAVE Page FUJIFILM Digital Camera Worldwide Network Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page http://www.fujifilm.com/products/digital_cameras/index.html http://www.fujifilm.com/products/ digital_cameras/index.html Be sure to read this notes before using ■ Handling the Battery *Conﬁ rm your battery type before reading the following descriptions 1Camera uses the Rechargeable Lithium-ionBattery