Warning Displays

The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed

Explanation

 

Remedy

 

 

 

 

 

 

(Lit red)

The battery is low or completely out of charge.

Charge the battery or load fully charged battery.

V(Blinking red)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is a strong likelihood of camera shakeUse flash photography. We recommend using a

 

 

 

 

 

 

 

 

because the shutter speed is slow.tripod.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

{

The AF (autofocus) cannot work effectively.

If the image is too dark, take the picture at a

 

 

 

 

 

 

 

 

 

distance of around 2 m (6.6 ft.) from the subject.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use AF lock to take the picture (p.30).

 

 

 

 

(Lit red)

 

 

 

 

 

 

• Select Macro mode when taking close-up shots.

*The shape of the AF

 

 

 

frame differs depending

 

 

 

on the setting in the

 

 

 

[SHOOTING MENU].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aperture/

The camera cannot shoot the picture at the correct

The picture can be taken, but the correct brightness

Shutter speed display

brightness due to too bright or dark shooting(exposure) will not be obtained.

 

 

 

 

(Lit red)

condition.

 

 

 

 

 

 

 

 

 

 

 

 

 

[FOCUS ERROR]Camera malfunction or fault.

• Turn the camera on again, taking care not to touch

 

 

 

the lens.

 

 

 

 

 

 

 

 

 

 

 

[ZOOM ERROR]

 

• Turn the camera off and on again. If the message

 

 

 

still appears, contact your FUJIFILM dealer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[NO CARD]

Memory Card is not inserted when transferringInsert an Memory Card.

 

 

images.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The Memory Card or internal memory is not

• Format the Memory Card or internal memory on

 

 

 

 

 

 

 

 

formatted.

 

the camera (p.103).

 

 

 

 

 

 

 

 

• The Memory Card contact area is soiled.

• Wipe the contact area on the Memory Card with a

[CARD NOT INITIALIZED]

 

 

soft, dry cloth. It may be necessary to format the

 

 

 

 

 

 

 

 

 

 

Memory Card (p.103). If the message still

 

 

 

 

 

 

 

 

 

 

appears, replace the Memory Card.

 

 

 

 

 

 

 

 

• Camera fault.

• Contact your FUJIFILM dealer.

 

 

 

 

 

 

 

 

 

 

 

126