FujiFilm Z10fd The, The, , or, , or, flash, Flash, than C, battery, blurred, selected, pictures, cannot be, The playback, The image is, on the image, image is dark

Troubleshooting

Matters	Problems		Possible causes					Solutions	Page
		The shutter button was pressed while the						Wait until the charging is completed before	53
		flash was charging.						pressing the shutter button.
		The [	SHOOTING MODE] is set to				,	Change the Shooting mode.	44
		,,	, or .
	Cannot use the
		The battery has run out.						Charge the battery or load fully charged
	flash.								13, 15
								battery.
		Continuous shooting is selected.						Set continuous shooting to OFF.	61
Flash		The flash mode is set to C.						Set the flash mode to something other	52
								than C.
	The flash settings	The [	SHOOTING MODE] is set to					The flash settings are restricted because
	are restricted and	AUTO,	,	, ,, ., /, ,		,	,	the camera settings are tailored to the	44
	cannot be	,	, ,	, or	.			scene being shot. Change the Shooting
	selected.							mode for a wider range of flash settings.
	The playback	The subject is too far away.						Move to within the effective flash range	50, 53
	image is dark							before taking the picture.
	even though the
		Your finger was covering the flash.						Hold the camera correctly.	25
	flash was used.
		The lens is dirty.						Clean the lens.
		AF frame (lit red) and {appeared when						Check the focus on the subject and take	26,
	The image is	taking pictures.						pictures.	28,
	blurred.								126
Photographed images
		appeared when taking pictures.						It may cause camera shake. Hold the	27,
								camera steadily.	126
	There is speckling	The picture was taken with a slow shutter						This is a characteristic of CCDs and does
		speed (long exposure) in a high-						not indicate a camera fault.	–
	on the image.	temperature environment.

134