Warning Messages and Displays

 

 

 

 

 

 

Warning

Description

Solution

PRESS AND HOLD

An attempt was made to choose a fl ash

Exit silent mode before choosing a fl ash mode or ad-

THE DISP BUTTON TO

mode or adjust the volume with the camera

justing the volume.

DEACTIVATE SILENT MODE

in silent mode.

 

 

A connection error occurred while pictures

Confi rm that the device is turned on. If the device is

 

connected via USB, check that the cable is connected;

COMMUNICATION ERROR

were being printed or copied to a computer

when using infrared, make sure the ports are aligned

 

or other device.

and within transmitting range of each other.

 

 

 

The picture is marked with a eicon.

The camera may not be able to send pictures created

 

with other devices via infrared.

 

 

CANNOT BE TRANSMITTED

A movie over 60 s long is selected for trans-

Movies over 60 s long can not be sent or received via

mission.

infrared.

 

 

Infrared transmission interrupted.

Ensure that there are no obstacles between the two

 

devices and that the devices are in range.

 

 

 

Infrared transmission interrupted.

Ensure that there are no obstacles between the two

 

devices and that the devices are in range.

CANNOT BE RECEIVED

 

The selected movie selected is over 60 s

Movies over 60 s long or created with other cameras

 

 

long or was created with another camera.

can not be sent or received via infrared.

 

 

Check printer (see printer manual for details). To re-

PRINTER ERROR

 

sume printing, turn the printer off and then turn it

 

Printer out of paper or ink, or other printer

back on.

PRINTER ERROR

error.

Check printer (see printer manual for details). If print-

 

ing does not resume automatically, press MENU/OK to

RESUME?

 

 

resume.

 

 

 

An attempt was made to print a movie, a

Movies and some pictures created with other devices

 

can not be printed. If the picture was created with the

CAN NOT BE PRINTED

picture not created with the camera, or a

camera, check the printer manual to confi rm that the

 

picture in a format not supported by the

printer supports the JFIF-JPEG or Exif-JPEG format. If it

 

printer.

does not, the pictures can not be printed.

 

 

104