Chapter 2
Using the Stylistic 2300 Pen Tablet
This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic 2300 pen tablet. You should familiarize yourself with this information before you attempt to operate the system.
System States
Before you begin using the Stylistic 2300 pen tablet, review the different system states (or modes) that the pen tablet can use. Being familiar with these system states will help you determine whether it is appropriate to turn on, resume, suspend, or shut down the system when you begin a new session or end your current session. System behavior for each system state is described briefly in the following, with each system state listed in decreasing order of power usage:
•Fully On state
The system is running and the display screen is on. The system responds to the pen or other input.
•Idle and Standby states
Some system functions are regulated or turned off to conserve power. The display screen may be turned off. The system returns to the Fully On state when pen activity or other input is detected.
•Suspend-to-RAM mode
System operation is suspended. Most system functions are turned off to conserve power. Power to memory is on, maintaining data in programs that were running before system operation was suspended. The system does not respond to the pen or other input when in
•Suspend-to-Disk mode
System operation is suspended. All system functions are turned off to conserve power. Active data in programs that were running before suspending system operation is stored on the hard disk drive. The system does not respond to the pen or other input. Refer to the “Resuming System Operation” section later in this chapter for information on returning the system to the Fully On state.
