Fujitsu 2300 manual Calibrating the Pen

2.Remove the battery from the pen barrel.

3.Observing the polarity mark, insert a new battery into the pen barrel. (Insert the end of the battery with the negative terminal first.)

Note: You do not need to remove the spring from the pen barrel when you replace the battery; however, if the spring does come out of the pen barrel when you remove the battery, insert the spring into the pen barrel, as shown in Figure 3-2, before you insert the new battery. Close the pen by twisting the pen barrel clockwise until it is snug. In order to avoid damage to the pen, do not overtighten it.

You can now use the pen as you normally would.

You can obtain replacement AAAA batteries from your local battery reseller or order directly from the following sources:

•Bay Battery (800) 680-1993 Duracell product number MN2500

•Eveready Battery Company, Inc. (800) 383-7323 Eveready model number E96

Calibrating the Pen

You calibrate the pen to adjust the cursor position on the screen relative to the position of the pen. If the cursor is not displayed under the pen tip when you use the pen, you should calibrate the pen.

Pen calibration may be required due to the following situations:

•The previous user of the Stylistic 2300 pen tablet writes with the opposite hand.

•The system has been in use for some time and the pen has not been recalibrated.

•You have rotated the screen from landscape (wide) to portrait (tall) orientation, or from portrait to landscape orientation. (Note that rotating the screen does not affect pen calibration, however, changing the screen orientation may cause you to hold the pen tablet and pen in a slightly different position.)

3-6 Care and Maintenance