Fujitsu ASU12RLS, ASU9RLS, AOU9RLS, AOU12RLS manual Adjusting The Direction Of Air Circulation, En-10

Models: AOU12RLS Heat & Cool Model (Reverse Cycle) ASU12RLS AOU9RLS ASU9RLS

1 20
Download 20 pages 3.22 Kb
Page 11
Image 11
ADJUSTING THE DIRECTION OF AIR CIRCULATION

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Control Unit.

Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped moving.

Vertical Air Direction Adjustment

Press the SET button (Vertical) (Fig. 6 b9).

Each time the button is pressed, the air direction range will change as follows:

RDANGER!

Never place fingers or foreign objects in- side the outlet ports, since the internal fan operates at high speed and could cause personal injury.

1 Vertical Air Direction AdjustmentPress the SET button (Vertical) (Fig. 6 b9). 2 Horizontal Air Direction AdjustmentPress the SET button (Horizontal)(Fig. 6 b10). 3 En-10Manual background 4 Manual backgroundManual background 5 Manual backgroundManual background 6 Manual backgroundManual background 7

Types of Air flow Direction Setting:

For better heating/cooling effect, it is recommended to set the air direction in the following range.

1,2,3 : During Cooling/Dry modes

4,5,6,7: During Heating mode

The Remote Control Unit’s display does not change.

Use the air direction adjustments within the ranges shown above.

The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry mode : Horizontal flow 1

During Heating mode

: Downward flow 6

During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this pe- riod.

The air flow direction setting will temporarily become 1 when the temperature of the air flow is low at the start of the Heating mode.

Always use the Remote Control Unit’s SET button to adjust the vertical airflow louvers. Attempting to move them manually could result in improper op- eration; in this case, stop operation and restart. The louvers should begin to operate properly again.

During use of the Cooling and Dry modes, do not set the Air Flow Direc- tion Louvers in the Heating range (4 - 7) for long periods of time, since wa- ter vapor may condense near the out- let louvers and drops of water may drip from the air conditioner. During the Cooling and Dry modes, if the Air Flow Direction Louvers are left in the heat- ing range for more than 30 minutes, they will automatically return to posi- tion 3.

When used in a room with infants, chil- dren, elderly or sick persons, the air direction and room temperature should be considered carefully when making settings.

Horizontal Air Direction Adjustment

Press the SET button (Horizontal)(Fig. 6 b10).

Each time the button is pressed, the air direction range will change as follows:

1 Manual backgroundManual background 2 Manual backgroundManual background 3

The remote control unit’s display does not change.

En-10

Page 11
Image 11
Fujitsu ASU12RLS, ASU9RLS, AOU9RLS Adjusting The Direction Of Air Circulation, En-10, Vertical Air Direction Adjustment