System Operation, En-16, To Use the Zone Control

SYSTEM OPERATION

One remote controller can control up to 16 air conditioners. All the air conditioners can be operated with the same set- ting.

Remote controller

Outdoor

unit

Indoor unit

Unit No.1

Unit No.2

Unit No.16

When the ZONE control button is pressed while multiple air conditioners are being centralized controlled, only the preset air conditioners stop.

Preset units will stop.

The ZONE lamp (green) will light.

To Stop the ZONE CONTROL

Press the ZONE control button one more time.

Those units that were stopped will start again.

The ZONE lamp will go out.

Image 17

Contents

Nglis h Indoor U nitOutdoor U nit Safety Precautions Contents En-2 Name of Parts En-3 PreparationOperation To Stop Operation Press the START/STOP button About Mode OperationEn-4 Press the SET Time button and set the timer time Timer Operation OFF TIMER/ON TimerTo confirm settings To change settings En-6 Timer Operation Weekly Timer Presstime. the SET Time button to set the day’s first OFF En-7Times OFF To Stop Weekly Timer Operation Reviewing the Time Settings Cancelling Selected Time SettingsEn-8 Press the SET button again New setting overwrites the previous setting Carry out steps 1 to 3 of the Setting Up the WeeklyEn-9 To edit Precautions during setup Using the DAY OFF SettingEn-10 About the DAY OFF En-11 Energy Save OperationTo Use the Energy Save Press the Energy Save button About the Energy Save Swing Operation Adjusting the Direction of AIR CirculationEn-12 About Swing Operation Clean the air filters Cleaning and CareEn-13 Hold down the hook at a and pull the fil- ter out En-14 Errors and Self Diagnosis Operation Details Temperature and Humidity RangeEn-15 Operation and Performance System Operation Control Several Units with just one Remote ControllerEn-16 To Use the Zone Control En-17 TroubleshootingSymptom Problem En-18 Doesn’t operate at all Has there been a power failure?Check Once More