ENERGY SAVE OPERATION
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
To Use the ENERGY SAVE
Press the ENERGY SAVE button.
The unit will run in the ENERGY SAVE mode.
The ENERGY SAVE lamp (green) will light.
To Stop the ENERGY SAVE
Press the ENERGY SAVE button one more time.
The ENERGY SAVE mode will be turned off.
The ENERGY SAVE lamp goes off, and the unit will return to the former operat- ing conditions.
NON STOP AM | CLOCK | AUTO |
| °F |
|
TIMER | SET TIME TEMP./DAY | FAN |
MODE |
| CONTROL |
|
| MASTER |
|
| CONTROL |
CLOCK ADJUST |
|
|
| ZONE | ENERGY SAVE START/STOP |
| SET | DAY OFF |
About the ENERGY SAVE
●The energy conservation mode (ENERGY SAVE) raises the set temperature slightly in the cooling mode and lowers the set temperature in the heating mode, using a computer program to economically control the operation of the unit.
●If you press the ENERGY SAVE button while the air conditioner is on, it will change to the conservation mode. If you press the ENERGY SAVE button while the unit is in the timer mode (ON timer, WEEKLY timer), the unit will go into the conserva- tion mode when the unit starts with the timer.
●If you turn off the air conditioner while in the conservation mode, the mode will be shut off.
●The temperature set on the remote controller will not change if the energy save mode is used.
■* When Heating
After the ENERGY SAVE button is pressed, the set tempera- ture will be lowered about 2 °F every 30 minutes. When it has lowered a total of 4 °F, then it will hold that temperature.
2 °F | 4 °F |
|
|
30min.
▲Set to the ENERGY SAVE mode.
■When Cooling
After the ENERGY SAVE button is pressed, the set tempera- ture will be raised about 1 °F every 30 minutes. When it has gone up a total of 2 °F, then it will hold that temperature.
▼Set to the ENERGY SAVE mode.
30 min.
2 °F
1 °F
