Starting Weekly Timer Operation
1Press the TIMER MODE button so that “WEEKLY” ap- pears on the display.
2 | Press the START/STOP button to start operation. |
(This step is not necessary if the air conditioner is already running.) |
Weekly timer operation starts, and the operation lamp comes on.
(If the current time is between the first or second ON and OFF time set- tings for the current day, the air conditioner will start. Otherwise the air conditioner will remain off.)
The day display is replaced by the temperature display.
The upper time display now shows the current time, and the lower time display shows the next scheduled ON or OFF time.
| AM | CLOCK |
|
|
| PM TIMER | °F |
WEEKLY |
| ||
OFF |
| ||
|
|
| |
1 |
| ||
|
|
| |
TIMER | SET TIME TEMP./DAY | ||
MODE |
|
| |
CLOCK ADJUST
1 | ZONE |
| SET |
COOL
FAN
CONTROL
MASTER
CONTROL
ENERGY SAVE START/STOP
DAY OFF
2
To Stop Weekly Timer Operation
Reviewing the Time Settings
●To stop weekly timer while leaving the air conditioner run- ning:
Press the TIMER MODE button to select NONSTOP, OFF TIMER, or ON TIMER.
●To stop weekly timer operation and the air conditioner also: Press the START/STOP button.
Press the START/STOP button to stop the air conditioner, and then proceed as follows.
1Press the TIMER MODE button so that “WEEKLY” appears on the display.
2Press the TEMP./DAY button to select the day that you want to check.
3Press the SET TIME button (▲ or ▼) to switch between the “WEEKLY 1” or “WEEKLY 2” time displays.
Cancelling Selected Time Settings
Press the START/STOP button to stop the air conditioner, and then proceed as fol- lows.
1Carry out steps 1 to 3 of the “Setting Up the Weekly Timer Operation” procedure to select the day you want to edit.
2Press the SET button to select the ON time that you want to cancel.
Be sure to select an ON time (the upper time display).
3Hold down the ▼ side of the SET TIME button until the time display becomes blank “ 
”.
4 | Press the SET button. |
|
The first OFF time setting | (“WEEKLY 1” OFF time) is deleted and replaced | |
| by a flashing blank pattern “ | ”. |
5 | Press the SET button again. | |
This completes deletion of the “WEEKLY 1” ON/OFF settings. | ||
The second ON time setting (“WEEKLY 2” ON time) appears and flashes. If you wish to delete other time settings, repeat steps 2 through 5.
6Once the setting has been canceled, hold down the SET button for 3 seconds.
The WEEKLY display flashes briefly, and then the clock display appears.
| ON |
|
|
WEEKLY | PM TIMER | DAY |
|
OFF |
| ||
1 |
| ||
|
|
| |
TIMER | SET TIME | TEMP./DAY | FAN |
MODE |
|
| CONTROL |
|
|
| MASTER |
|
|
| CONTROL |
CLOCK ADJUST |
|
|
|
| 3 | ZONE | ENERGY SAVE START/STOP |
| SET | DAY OFF | |
2
Example: Clearing the “WEEKLY 1” ON/ OFF times for day 4 (Thurs- day)
| ON | |
TIMER | DAY | |
WEEKLY | OFF | |
1 | ||
| ||
PM |
| |
| ON | |
PM TIMER | DAY | |
WEEKLY | OFF | |
2 | ||
|
