Fujitsu AUU18RC, AUU42RC En-7, 2” times, Timer Operation Weekly Timer, Press the SET button

TIMER OPERATION (WEEKLY TIMER)

6Presstime. the SET TIME button to set the day’s first OFF

AM

ON

PM TIMER DAY

WEEKLY

The earliest OFF time you can set is 5 minutes after the ON time. The latest OFF time is 11:55 p.m. on the subsequent day.

1

OFF

7	Press the SET button.
	This registers the first OFF time	for the day, completing the “WEEKLY 1”

settings for that day.

The display switches to “WEEKLY 2”, and the day’s second ON time be- gins flashing.

TIMER SET TIME TEMP./DAY	FAN
MODE	CONTROL

MASTER

CONTROL

CLOCK ADJUST

6

ZONE	ENERGY SAVE START/STOP
SET	DAY OFF

8Repeat the operations described in Steps 4 to 7 to set the second ON and OFF times for the day (the “WEEKLY

2” times).

When you press the SET button after setting the “WEEKLY 2” OFF time, the system registers the “WEEKLY 2” settings for the day and returns you to the “WEEKLY 1” ON time setup process. (The first ON setting reap- pears and begins flashing.)

You can review your settings by pressing the SET button. Each press moves you to the next setting, as follows.

s WEEKLY 1	s WEEKLY 1	s WEEKLY 2	s WEEKLY 2
ON	OFF	ON	OFF

7

If the timer is not set, press the SET but-

ton with the time display blank “”, and perform next operation.

9Press the TEMP./DAY button to select another day for setup. The repeat steps 4 to 8 above to set the ON and OFF times for that day.

10When you have finished setting all of the times, hold down the SET button for 3 seconds.

The WEEKLY display flashes for 3 seconds while the new WEEKLY TIMER settings are registered, and then the clock display reappears.

AM CLOCK

NOTES:

(1)If no time values are flashing, the clock display will automatically reappear after 15 seconds if no buttons are pressed.

(2)A flashing time value indicates that the system is in time-setting mode. To return to the clock display you must hold down the SET button for 3 seconds.

(3)You do not need to set values for both WEEKLY 1 and WEEKLY 2. If you wish, you can set values only for WEEKLY 1 or only for WEEKLY 2.

(4)The allowable range for the day’s time settings is shown below.

Cannot set	5 min.	Available range	5 min.	Cannot set
ON	OFF		ON	OFF
Previous day’s WEEKLY			Next day’s WEEKLY
settings				settings
12:00 a.m.			12:00 a.m.

(5) If you set the OFF time to occur on the day following the ON time, the NEXT DAY caption appears on the display.

PM

PM TIMER

WEEKLY

2 NEXT DAY

ON

OFF

DAY

En-7