Fujitsu AWU36CX En-16, AUTO Restart, Temperature and Humidity Range, Operating Tips, Outdoor

OPERATING TIPS

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

AUTO Restart

In Event of Power Interruption

●Should the power supply to the air conditioner be inter- rupted by a power failure, the air conditioner will restart automatically in the previously selected mode once the power is restored.

●Should a power failure occur during TIMER operation, the timer will be reset and the unit will begin (or stop) operating under the new timer setting. In this event, the TIMER indicator lamp (yellow) will flash (see page 4).

●Use of other electrical appliances (electric shaver, etc.) or nearby use of a wireless radio transmitter may cause the air conditioner to malfunction. In this event, temporarily disconnect the power supply, reconnect it, and then use the remote control unit to resume operation.

Temperature and Humidity Range

COOLING/DRY MODE
	Outdoor	Outdoor		Indoor
	Unit	Temperature	Temperature		Humidity
					About 80 % or less
					If the unit is used for long pe-
					riods under high-humidity
COOLING MODELS	AOU36CX	About 70 to 115 °F	About 65 to 90 °F		conditions, condensation
					may form on the surface of
					the indoor unit, and drip onto
					the floor or other objects un-
					derneath.

●If the air conditioner is operated under higher temperature conditions than those listed, the built-in protection circuit may operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.

●Do not use this unit for any purposes other than the Cooling, (*)Heating, Dehumidifying, and air-circulation of rooms in ordinary dwellings.

En-16