Fujitsu AWU36CX manual Adjusting The Direction Of Air Circulation, En-10

ADJUSTING THE DIRECTION OF AIR CIRCULATION

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION VERTICAL SET button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION HORIZONTAL SET button.

Vertical Air Direction Adjustment

Press the AIR FLOW DIRECTION VERTICAL SET button (Fig. 6 M).

Each time the button is pressed, the air direction range will change as follows:

DANGER!

Never place fingers or foreign objects inside the outlet ports, since the internal fan oper- ates at high speed and could cause personal injury.

1	2	3	4	5
Types of Air flow Direction Setting:
1,2,3 : During Cooling/Dry mode				1
1,2,3,4,5 : * During Heating mode
				2
The remote control unit’s display does				3
not change.

● Always use the remote control unit’s

AIR FLOW DIRECTION button to adjust

the UP/DOWN air direction flaps or

RIGHT/LEFT air direction louvers. At-

tempting to move them manually

could result in improper operation; in

this case, stop operation and restart.

Fig. 9

4

5

The louvers should begin to operate

properly again.

● During use of the Cooling and Dry

modes, do not set the UP/DOWN air

●Use the air direction adjustments within the ranges shown above.

●The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry mode : Horizontal flow 1

* During Heating mode : Downward flow 5

●During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this pe- riod.

direction flaps in the range 4 to 5 for

long periods of time, since water vapor

may condense near the outlet port and

drops of water may drip from the air

conditioner.

● When used in a room with infants, chil-

dren, elderly or sick persons, the air

direction and room temperature

should be considered carefully when

making settings.

Horizontal Air Direction Adjustment

Press the AIR FLOW DIRECTION HORIZONTAL SET button (Fig. 6 O).

Each time the button is pressed, the air direction range will change as follows:

1 2 3 4 5

The remote control unit’s display does not change.

RIGHT/LEFT air direction louvers

●Use the air direction adjustments within the ranges shown above.

Example: When set to vertical air direc- tion

				Example: When set to horizontal air di-
1	2			rection
		3	4	5

Fig. 10

En-10