Fig. 1 Indoor Unit
1Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
3Remote Control Signal Receiver
4Indicator Lamps (Fig. 3)
5OPERATION Indicator Lamp
(green | COOL, DRY, FAN) |
(red | *HEAT) |
6TIMER Indicator Lamp (yellow)
7 SWING Indicator Lamp (orange)
(VERTICAL SWING)
8 SWING Indicator Lamp (orange)
(HORIZONTAL SWING)
●If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (See page 16 Auto Restart).
9Intake Filter (Fig. 4)
;UP/DOWN Air Direction Flaps
ARIGHT/LEFT Air Direction Louvers
(behind UP/DOWN Air Direction Flaps)
BDrain Hose
CAir Cleaning Filter (optional)
Fig. 5 Outdoor Unit
DIntake Port E Outlet Port
Fig. 6 Remote Control Unit
FSLEEP button
GMASTER CONTROL button
HSET TEMP./SET TIME buttons () I Signal Transmitter
J TIMER button
K FAN CONTROL button L START/STOP button
M AIR FLOW DIRECTION
VERTICAL SET button
N AIR FLOW DIRECTION
VERTICAL SWING button
O AIR FLOW DIRECTION
HORIZONTAL SET button
P AIR FLOW DIRECTION
HORIZONTAL SWING button Q TIME ADJUST button
R ACL button
Rear side (Fig. 7)
STEST RUN
●Touch the two metal contacts with a me- tallic object to send the signal to perform a test run.
●Perform a test run only when installing the air conditioner. If the signal to perform a test run is received during normal opera- tion, the air conditioner’s thermostat will malfunction.
●If the signal to perform a test run is re- ceived during normal operation, the unit will switch to the test operation mode and the indoor unit’s OPERATION and TIMER indicator lamps will flash simultaneously.
●To stop the test operation mode, press the START/STOP button to stop the air condi- tioner.
TRemote Control Unit Display (Fig. 8) U Transmit Indicator
V Clock Display
W Operating Mode Display X T imer Mode Display Y Fan Speed Display
Z Temperature Set Display [ T imer Set Indicator
\ Temperature Set Indicator