Fujitsu C150-E194-01EN Notes concerning Connection, fi-4110CU Image Scanner Operator’s Guide

Models: C150-E194-01EN

1 38
Download 38 pages 54.67 Kb
Page 15
Image 15
2.3 Connection

2.3 Connection

This section explains how to connect this scanner and the computer, and also how to install the driver and other software.

2.3.1 Notes concerning Connection

When connecting cables, adhere to the following notes:

Fire or electric shock

-Do not use AC adapter other than in the package. Failure to do so could result in a fire or cause the scanner to fall.

-Before connecting or disconnecting a device, turn off the power switch on the personal computer, disconnect the power plug from the outlet, then follow the written procedure.

-Use the scanner only with the indicated supply voltage. Do not make a starburst connection.

-Do not hold the power cable or AC adapter with moistened hands when connecting or disconnecting it.

-If the power plug is dusty, clean it with a dry cloth.

-Do not put anything heavy on the power cable, and do not damage it by pulling, forcibly bending, twisting, or heating. Do not alter the power cable in any way.

-Do not use a power cable if it is damaged or the plug does not fit snugly into the outlet.

Fire, electric shock, or fault

-Insert the power cable all the way to the rear of the outlet.

-Hold the plug when disconnecting the power cable from the outlet.

-Do not connect to the same outlet as large power-consumption equipment such as a copy machine or a shredder.

fi-4110CU Image Scanner Operator’s Guide

2-3

Page 15
Image 15
Fujitsu C150-E194-01EN manual Notes concerning Connection, fi-4110CU Image Scanner Operator’s Guide