Fujitsu CELCIUS M/V/R Working with floppy disks, To insert a floppy disk, To remove a floppy disk

	Operation
Working with floppy disks
i	Follow the instructions supplied by the vendor of the floppy disks.
	Do not clean the floppy disk drive with cleaning floppy disks. Any attempt would destroy

the read/write head in the disk drive within 20 seconds.

5

4

1

2

3

3 = Write protection tab for a 1.44 MB floppy disk

6 7

4 = Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk

To insert a floppy disk

►Push the floppy disk into the drive in the insertion direction (1) until it engages. The label should be facing upward.

To remove a floppy disk

►Push the eject button (5).

Protect the floppy disk against being overwritten or erased

►Slide the write-protect slider (3) into position (6). The hole is now visible. The disk is write-protected.

Deactivate write protection

►Slide the write-protect slider (3) into position (7). The hole is now covered. The disk is not write-protected.

A26361-K990-Z120-1-7619, Edition 6 21