Fujitsu CELCIUS M/V/R manual Push the slot cover into the slot

Models: CELCIUS M/V/R

1 92
Download 92 pages 14.47 Kb
Page 65
Image 65

System upgrades

a

1

2

3

2

Push the slot cover into the slot (1).

!

Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it

does not, you will find it difficult to close the locking rail. There is a danger of damage.

 

► Fold the locking rail (3) closed by pressing the clips (2) through the notches on the casing rear panel from the outside until they engage.

► If you have removed the cross-piece, install it now (see "Installing the cross-piece"). ► Install the fan (see "Installing the side fan").

► Close the casing (see "Closing the casing").

If you have installed or removed a PCI board, please check the relevant PCI slot settings

i in the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI board documentation.

A26361-K990-Z120-1-7619, Edition 6

57

Page 65
Image 65
Fujitsu CELCIUS M/V/R manual Push the slot cover into the slot