Fujitsu CELCIUS M/V/R manual Installing the cross-piece

System upgrades

Installing the cross-piece

a a

c

2

2

1

b

►Insert the cross-piece into its brackets (a) on the rear of the casing at a slight angle. Make sure that the plexiglass plate of the cross-piece is not trapped between the memory slots.

►Press the cross-piece into the casing in the direction of the arrow (1) until the lugs (b) of the cross-piece hook into the brackets (c) in the casing.

►Install the side fan (see "Installing the side fan").

►Install the ventilation duct (see "Installing ventilation duct (CELSIUS V)" or "Installing the ventilation duct (CELSIUS R5xx)").

►Close the casing (see "Closing the casing").

A26361-K990-Z120-1-7619, Edition 6 51