Fujitsu CELCIUS M/V/R manual Installing and removing a board, Installing a board

Models: CELCIUS M/V/R

1 92
Download 92 pages 14.47 Kb
Page 62
Image 62

System upgrades

Installing and removing a board

!Please take note of the section "Information about boards".

The number, position and arrangement of the board slots on the mainboard can be found in the manual for the mainboard. Boards may already be installed on shipment.

Installing a board

Open the casing (see "Opening the casing").

Remove the fan (see "Removing the side fan").

Remove the cross-piece if it is in the way (see "Removing the cross-piece”).

1

2

1

3

Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.

Fold open the locking rail in the direction of the arrow (2).

Remove the slot cover from the slot (3).

!

Do not dispose of the slot cover. For cooling, protection against fire and in order to comply

with EMC regulations, you must refit the slot cover if you remove the board.

 

► Take the new board out of its packaging. ► Make the required settings for the board.

54

A26361-K990-Z120-1-7619, Edition 6

Page 62
Image 62
Fujitsu CELCIUS M/V/R manual Installing and removing a board, Installing a board