106
CHAPTER2 Dependence Functions
2.3.1.6 Debug mode
Debug mode includes the following modes. Selectable debug mode varies with the
emulator or its connection configuration.
RealTimeMemory mode
RAM Checker mode
Setting of debug mode
This mode sets debug mode. Debug mode includes RealTimeMemory mode and RAM Checker mode, and
selectable debug mode varies with the emulator or its connection configuration.
To set these mode, select [Environment] - [Setup debugging environment] - [Select Debug Function] menu
or by using the SET MODE command on the command window.
RealTimeMemory mode
This mode enables the real-time monitor function. This mode enables to display data for a "256 bytes 2"
area in the real-time memory window without breaking the MCU at all during program execution.
RAM Checker mode
This mode enables the RAM Checker function. This mode allows you to record the access history of the
monitoring address in the log file.
Notes:
In an environment where debug mode cannot be selected, RealTimeMemory mode is used.
The real-time monitor function can be used only in an environment where the external trace
function can be used. The external trace function may not be used depending on the
specification of the adaptor board. Check the specification of the adaptor board before using it.
The RAM Checker function can be used only in an environment where the used core is FR60Lite
or FR80S, and the external trace function can be used. The external trace function may not be
used depending on the specification of the adaptor board. Check the specification of the adaptor
board before using it.