192
CHAPTER2 Dependence Functions
3. (If the trace window is already displayed), update trace data.
- Right-click on the trace window, and select [Refresh] from the pop-up menu. Trace data is updated in
the trance window.
For details, refer to Section "3.14 Trace Window" in "SOFTUNE Workbench Operation Manual".
Using command window
1. Display trace data for each display mode.
RAW data: SHOW TRACE
Instruction: SHOW DETAILTRACE
Source: SHOW DETAILTRACE
For details, refer to Section "4.16 SHOW TRACE (type 1)" or "4.27 SHOW DETAILTRACE" in
"SOFTUNE Workbench Command Reference Manual".
Note:
When the disassembly is performed, data is processed and displayed by reading from memory. If an
instruction is rewritten after code fetching, data will not be displayed correctly.