125
CHAPTER2 Dependence Functions
The sequencer operates as shown below when it uses the real-time monitoring bus interface:
[Setup Example]
>SET SEQUENCE 1.3.2, r=4
Events 1, 3, and 2 are specified respectively for Levels 1, 2, and 3. Event 4 is specified as a restart
condition.
Setting Sequencer
The sequencer can be set by the dialog or the command.
Setting by dialog
Select [Debug] - [Sequence] menu.
For details, refer to "4.6.6 Sequence" in "SOFTUNE Workbench Operation Manual".
Setting by Command
1. The event is set according to the SET EVENT command.
2. The event set by the SET SEQUENCE command is set as a sequence.
For details, refer to "3.15 SET EVENT" or "3.31 SET SEQUENCE (type2)" in "SOFTUNE Workbench
Command Reference Manual".
Start
Event 1
NO

Level 1

YES
Event 3
NO

Level 2

YES
Event 2
NO

Level 3

YES
Event 4
YES Event 4
YES
Break
NO
NO