Fujitsu E-6624 Exiting from the Security Menu, Fields, Options and Defaults for the Security Menu

					S e c u r i t y M e n u
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field	Options		Default	Description
Supervisor	–—		Clear	A display-only field. Set is displayed when the system supervisor password
Password is:				is set and Clear when it is not.
User Password is:	–—		Clear	A display-only field. Set is displayed when the general user
				password is set, and Clear when it is not.
Set Supervisor	–—		[Enter]	Sets, changes or cancels the Supervisor Password. Supervisor’s Password
Password				may be up to seven characters long and must include only letters or num-
				bers (no symbols). Passwords are NOT case- sensitive. To cancel a pass-
				word press the Enter key instead of entering characters in the Enter New
				Password field and in the Re-enter New Password field. When a Supervi-
				sor Password is set it must be used to access the BIOS setup utility.
Set User Password	–—		[Enter]	This field can only be accessed if the Supervisor Password is set. Sets,
				changes or cancels the User Password. The User Password may be up to
				seven characters long and must include only letters or
				numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
				password press the Enter key instead of entering characters in the Enter
				New Password field and in the Re-enter New Password field. When a
				User Password is set it must be used to access the BIOS setup utility.
Minimum User	–—		[0]	Supervisor can set password length (0 to 8) for user password. User can-
Password Length:				not set a password shorter than the minimum length.
Password on Boot:	■	Disabled	[Disabled]	When set to First Boot, a password (User or Supervisor) is required just
	■	First Boot		once after the Power On Self Test (POST) before the operating system
	■	Every Boot		will be read from a disk. When set to Every Boot, a password (User or
				Supervisor) is required every time after the Power On Self Test (POST)
				before the operating system will be read from a disk. When set to Dis-
				abled no password is required.
Password on	■	Disabled	[Disabled]	When Enabled, a PS/2 keyboard and mouse are locked out when an
Unattended Boot	■	Enabled		unattended boot occurs via LAN until a password is entered.
Password on	■	Disabled	[Disabled]	When set to Enabled, a password (User or Supervisor) is required before
Resume:	■	Enabled		the operating system will resume. When set to Disabled no password is
				required. If no Supervisor Password is set this feature is not available and
				no password is required.
Boot from Remov-	■	All	[All]	Enable password allows supervisor access only.
able Media:	■	Supervisor only
Floppy Disk Access:	■	All	[All]	Enable password allows supervisor access only.
	■	Supervisor only
Hard Disk Security:	–—		–—	Configures hard disk security features
Owner	–—		–—	Sets Owner information.
Information:
Hard Disk Boot	■	Normal	[Normal]	Sets protection mode for hard disk drive.
Sector:	■	Write Protected
Security Panel on	■	Disabled	Enabled	Enables or disables the Security Panel feature upon Resume from Sus-
Resume	■	Enabled		pend.

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or

move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

23