Fujitsu fi-4110CU manual Confirming the System Conditions, Connecting the Power Cable

2.3.2 Confirming the System Conditions

The following environments are required for connecting this scanner to the computer to read images.

System	Conditions
OS	Windows 98 preinstall version
	Windows 2000 preinstall version
	Windows ME preinstall version

Interface

The computer has a built-in USB port and the computer maker certifies that the port operates correctly.

uNote

-If your computer is updated to Windows 98 from Windows 95 or NT, the USB port, even if provided, cannot be used.

2.3.3Connecting the Power Cable

1)Connect the power cable to the inlet of the scanner.

2)Insert the AC adapter into the outlet.

Inlet

uKey point

-The image scanner is not equipped with a power switch. When connecting a cable or changing the setting, first be sure to disconnect the power cable from the outlet.

-While the driver and the software is active, the reading lamp turns on or off in accordance with the status of the connected personal computer.

2-4 fi-4110CU Image Scanner Operator’s Guide