Fujitsu fi-4110CU manual Fi-4110CU Image Scanner Operator’s Guide

Component Name		Function
Operator	Copy density	Adjusts copy density (dark/light) in five stages.
panel	dial
	Function No.	Displays the Function No. or also displays the scanner
	display panel	read mode as follows;
		On: Single-side reading mode
		Blink: Double-sided reading mode
		Mark: An application is being activated
		When the AC adapter is connected to the scanner or the
		PC’s power is turned on, the initialization of scanner is
		executed. The display on the panel changes as follows;
		P ® 0 ® 1 (When 1 appears, scanner becomes ready)
	Function button	Selects a function to be started using this button.
		This button’s function is set using Launch.
	Duplex button	Switches between read modes. You can confirm the
		current read mode with the Function No. display panel.
	Send to button	Copies documents loaded in the document support.
		Starts the operation specified by the Function button.
	Scan button	Scans the document placed in position.
	Power lamp	Stays lit while power is being supplied.
Stacker		Stacks the scanned documents.

Note:

Pressing the Send to or Scan button initiates the application software. The mark is displayed until the application software is ready. If the application software fails to get ready and the function No. display is restored, the Send to or Scan processing is canceled.

fi-4110CU Image Scanner Operator’s Guide 1-3