1.3 Operator Panel
The operator panel is located on the right side of the scanner. This panel is comprised of a Function Number display, four buttons and a LED.
|
| Function No |
|
| display |
|
| Function |
|
| Send to |
|
| Scan |
|
| Power button |
|
| LED |
| Name | Function |
Function Number | Indicates the function | |
display |
| Number and error status. |
Button | Function | Changes the Function acti- |
|
| vated by the Send to button |
|
| (*). |
| Send to | Launches the linked appli- |
| Scan | cation software (*). |
|
| |
| Power | Turns the scanner ON and |
| button | OFF. |
LED | - | Lights when the scanner is |
|
| turned ON. |
*) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help and the
■Indications on the Function Number display
■8
Blinks only one time upon turning on the scan- ner.
■P
Indicates that the scanner has been turned ON and is being initialized.
■0
Indicates that initialization will soon end.
■1
Indicates that initialization has ended success- fully.
The scanner is now in "Ready Status".
■U
Indicates that a temporary error occurred when documents were being scanned. A number appearing in alternation following the U (i.e., 1, 2 and 4) refers to the type of error.
To return the scanner to the ready status ("1"), press "Scan" or "Send to" button.
■E
Indicates that a device (hardware) alarm has occurred during scanning of documents.
"E" and the alarm Number (2 to 9 and c) will appear alternately.
To return the scanner to the ready status ("1"), press "Scan" or "Send to" button.
If this alarm occurs, turn the power off and on again. If the alarm continues after turning the power on again, contact your service engineer.
| 2 | |
|