Fujitsu fi-5110C ■Cleaning Materials, ■Cleaning Method, ■Parts to Clean and When, Appendix 2 DAILY CARE, AP-4, Parts, Number, Remarks, Cleaning, Materials, Part to clean

Appendix 2 DAILY CARE

When operating the scanner, the

￿￿￿￿￿￿￿ ADF’s inside glass becomes

very hot.

Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least

15 minutes.

Do not turn off the scanner when you clean the Feed rollers or Eject rollers.

■Cleaning Materials

Cleaning	Parts	Remarks
Materials	Number
Cleaner F1	CA99501-	1 bottle
(or isopropyl	0013	Moisten the cloth
alcohol)		with this fluid and
		wipe the scanner
		clean.(*)
Lint-free dry	Commercially available one
cloth

*For details about cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.

■Cleaning Method

The ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1.

ATTENTION	Do not use aerosol sprays to clean
	the scanner. Aerosol sprays can blow
	dirt and dust inside the scanner,
	resulting in scanner failure or
	malfunction.

■Parts to Clean and When

	Part to clean		Standard Cleaning Cycle
Pad ASSY		Clean these parts after every
		1,000 scans.
Pick roller
Feed rollers
Plastic rollers
Glass

The scanner must be cleaned

ATTENTION

frequently if you scan any of the following type of paper sheets:

•Documents of coated paper

•Documents that are almost completely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Handwritten documents

For details on the cleaning the ADF, refer to "Chapter 4 Daily Care" in fi-5110C Operator’s Guide in the Setup CD-ROM".

	AP-4
fi-5110C Image Scanner Getting Started