Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu fi-5110C 2.3 Connecting the USB Cable, For Windows 98:, For Windows 2000:

1 27

Download 27 pages, 1.21 Mb

3. Connect the AC adapter.

Use only the AC adapter provided by

ATTENTION	the manufacturer.

1) Connect the AC cable to the AC adapter.

2)Connect the AC adapter connector to the scanner’s DC inlet.

3) Plug the AC cable into the outlet.

	The Function Number Display and the
HINT	LED may flash for an instant when
	plugging the AC cable into the scanner.

2.3 Connecting the USB Cable

Follow the procedure below to connect the USB cable.

1.Connect the USB interface cable to the USB interface connector.

2.Connect the other end of the USB interface cable to the PC.

•Be sure to use the USB cable which

ATTENTION

comes as an accessory with this scanner.

Correct operation with commercially available cables is not guaranteed.

•When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly.

3.Press the power button to turn ON the scanner.

Your scanner will be automatically detected.

For Windows 98:

When a request for inserting the CD-ROM for Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

The installation of the scanner is completed.

fi-5110C Image Scanner Getting Started		10

Contents

fi-5110CImage Scanner Getting Started Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter 1 PREPARING THE SCANNER INTRODUCTION ■Regulatory Information FCC declaration Canadian DOC Regulations Bescheimigung des Herstellers / Importeurs Use in High-safetyApplications About the Use of Mercury Trademarks How Trademarks Are Indicated In This Manual Manufacturer ■Note, Liability Warning Label Warning Indications Used In This Manual Screen Examples In This Manual About Maintenance ■Safety Precautions Do not use the scanner if you smell a strange odor Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or climb on top of the scanner Firmly insert the power plug Do not install the scanner in direct sunlight Chapter 1 PREPARING THE SCANNER 1.1Checking the Contents of the Scanner Package 1.2 Names of Parts ■Rear ■Front 1.3 Operator Panel ■Indications on the Function Number display Chapter2 INSTALLATION OF THE SCANNER 2.1Installing the Scanner Application For FUJITSU TWAIN32 Scanner Driver ■Preparation ■Installing the FUJITSU TWAIN32 Scanner Driver ■Installing ScandAll For FUJITSU ISIS Scanner Driver ■Installing the FUJITSU ISIS Scanner Driver ■Installing QuickScan Pro™ Error Recovery Guide Image Processing Software Option (Trial) 2.2 Installing the Scanner 2.3 Connecting the USB Cable 2.4 Confirming Installation ■Confirming with ScandAll ■Confirming with QuickScan Pro™ Page Appendix 1 TROUBLESHOOTING ■Troubleshooting checklist AP-1 AP-2 ■Temporary error ■Device alarm (Non-Temporaryerror) AP-3 ■Cleaning Materials ■Cleaning Method ■Parts to Clean and When Appendix 3 REPLACING CONSUMABLES ■Replacing the Pad ASSY ■Consumables and Replacement Cycles ■Replacing the Pick Roller AP-5 fi-5110CImage Scanner Getting Started P3PC-1072-03EN