Fujitsu FI-553PR 3. Basic Operation, 3.1. Setting Printing Position, 3.2. Print Setup, 3.3. Replacing the Print Cartridge

3. Basic Operation

3.1. Setting Printing Position

1.Open the Print Section Cover.

2.Move the Print Cartridge Holder to an appropriate printing position.

Grab the Print Cartridge Holder as below, slide it to right or left (Section 6) and set it at a position where you want to print within the printing area of document.

HINT	● The notch on the holder shows the print
	position.

●The Imprinter cover has document size markings. You can use them to align the notch to adjust the printing position.

●Put the actual document on the ADF to confirm that the Print Cartridge is positioned within the printing area of the document.

3.2. Print Setup

You can configure settings of the Imprinter with the scanner driver dialog box.

FUJITSU TWAIN driver (Example)

In the TWAIN driver dialog box, click [Option] button.

In [Option] dialog box, choose [Imprinter (Endorser)] tab and specify the Imprinter settings.

Available items are:

HINT

• Position to start printing (Y offset)

• Font orientation (Horizontal or vertical)

•String to print （Max. 40 characters）

•Counter Setup （column, add/subtract, step, etc.）

For the details, please refer to “FUJITSU TWAIN 32 Scanner Driver User’s Guide” or “TWAIN Driver Help”

3.3. Replacing the Print Cartridge

Replace the Print Cartridge as follows:

ATTENTION	• When the following message appears, replace the
	Print Cartridge as soon as possible.

If you keep on printing without replacing the Print

Cartridge, light print problem may occur.

•When installing or replacing the Print Cartridge, be careful not to insert it out of place.

1.Press button to turn off the Scanner.

2.Grab the both ends of the Print Section Cover, pull and turn it towards you to open the cover as shown below.

Print Cartridge Holder