2.3. Operation Test
After installing the Imprinter, check if the printing operation can be done in the Offline Print Test mode of the scanner.
1.While pressing [Function] button on the operator panel, press 
button.
Keep pressing [Function］ button.
2.Release [Function] button when the Function Number Display changes from [P] to [b].
Function | Function | Function |
|
|
Send to 
Function Number Display
Scan 
3. Place a blank document on the ADF paper chute.
ATTENTION | ● Use A4 or Letter size paper. If the size is |
| smaller than A4 or Letter, printing may not be |
| completed successfully. |
●Confirm that the Print Cartridge is positioned within the document width.
4. Press [Scan] button.
ÖThe paper is fed into the ADF. Test pattern 1 (c of the right figure) is printed on the paper starting 5mm (the range of error is ±4mm) from its leading edge.
HINT | There are following print test patterns: |
Test pattern 1(c) (Horizontal): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`0000 0000
Test pattern 2 (2) (Horizontal): abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 3 (3) (Horizontal):
Test pattern 4 (4) (Vertical): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (5) (Vertical): abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 6 (6) (Vertical):
When multiple sheet of documents are set on the ADF, the Test print repeats the Pattern from 1 to 6. The numbering data portion ”00000000” changes from 0 (Zero) with increment of 1(one).
| direction Feeding |
6 | 5mm |
5
4
3
2
c
Test pattern print sample
5. To stop Offline Print Test mode, press 
button. The scanner will be turned off.