Fujitsu FI-553PR 2.2. Mounting the Print Cartridge

7.Connect the power cable to the scanner.

2.2. Mounting the Print Cartridge

Mount the print cartridge as follows:

ATTENTION	When installing or replacing the Print Cartridge, be
	careful not to insert it out of place.

1.Confirm that the scanner is turned off.

2.Grab both ends of the Print Section Cover, pull and turn it towards you to open the cover.

Print Cartridge Holder

3.Remove the tape which fixes the Print Cartridge Holder.

4.Pinch the Arm with your fingers as shown below and release the Arm.

5. Take out the Print Cartridge from the bag.

6. Remove protection tape on the Print Cartridge.

ATTENTION	Do not touch the metal part of the Print
	Cartridge nor put the tape back again.

7. Put the Print Cartridge into the holder as below.

ATTENTION	Be careful not to let the Print Cartridge catch
	the print circuit film.

8.Lower the Arm gently until it locks in and fix the Print Cartridge in place.

9.Move the Print Cartridge Holder to an appropriate printing position.

The holder should be positioned where the printing area of document (Section 6) will pass under it.

10. Close the Print Section Cover.

6