4.3. Cleaning the Rollers
When ink or paper dust is stuck on the Imprinter feed roller surfaces, documents may not feed smoothly. To prevent feed problems, clean the roller surfaces regularly.
4.Confirm that the dirt or dust is removed from the rollers, then close the Imprinter Cover.
HINT
Recommended cleaning cycle is every 5,000 sheets. Actual cleaning cycle may be shorter depending on usage and documents.
1.Open the Imprinter Cover while the scanner is turned on.
2.With
Clean lower rubber rollers (total eight) rotating the rollers by holding down the [Scan] button and [Send to] button on the operator panel of the Scanner.
Imprinter Cover
ATTENTIONWhen cleaning, be careful not to touch the metal wheels located behind the upper rollers on the Print Cartridge holder cover.
3. Clean the Plastic Rollers.
Clean two black plastic rollers on the inner side of the Imprinter Cover.
Imprinter Cover
Rotate the rollers with your fingers gently wipe off the dirt or dust to clean the roller surface with
12