3.Pinch the Arm with your fingers as shown below and release the Arm.
4. Remove the old Print Cartridge.
5.Remove the protection tape on the new Print Cartridge.
ATTENTION | Do not touch the metal part of the Print |
| Cartridge nor put the tape back again. |
6.Put the Print Cartridge into the holder with its tab pointing to the right.
7.Lower the Arm gently until it locks in to fix the Print Cartridge in place.
8.Move the Print Cartridge Holder to an appropriate printing position.
The holder should be positioned where the printing area of document (Section 6) will pass under it.
ATTENTION | When printing close to document edge, be |
| careful about the position so that characters |
| may not be printed off of the document. |
9. Close the Print Section Cover.
10.Turn on the scanner.
11.Reset the Remaining Ink Counter.
ATTENTION | You must clear the Remaining Ink counter |
| |
| whenever you replace the Print Cartridge. |
For Windows 98, Windows Me, Windows 2000, Windows XP
cOn the [Start] menu, select [Control panel].
dSelect [Scanners and Cameras].
eOn
right click and select [Properties] (for Windows Me, Windows XP),
or double click (for Windows 98, Windows 2000).
fClick the [Device Set] tab.
gClick the [Clear] button on [Remaining Ink].