2.3 Installing the Scanner Software

To scan documents with this scanner, you must install a scanner driver for operating the scanner as well as scanning software (hereinafter called the "application") for launching the driver and performing a scan.

The scanner drivers and application provided with the scanner are as follows:

•Scanner driver:

FUJITSU TWAIN 32 (D page 5) FUJITSU ISIS (D page 6)

•Scanning application:

ScandAll PRO (D page 7)

(Supports both FUJITSU TWAIN 32 and ISIS)

Install either of the scanner drivers above and ScandAll PRO.

ATTENTION

Be sure to install a scanner driver, FUJITSU TWAIN 32 or FUJITSU ISIS for using VRS Image Processing Option, also. Installing any one of the scanner drivers will also install "Software Operation Panel," which is needed to change the scanner settings.

In addition, this scanner is bundled with the following software applications. To make full use of the scanner, try to use them together.

•Error Recovery Guide (D page 8)

When errors occur in the scanner, you can view information about what happened to the scanner and how to solve the problem on the screen of the personal computer.

•Image Processing Software Option <Trial Version> (D page 8)

This is an optional application for performing binary image processing on scanned images.

•QuickScan Pro™

<Trial Version> (D page 8)

This application complies with the ISIS standard and it is used for scanning images. This

scanner is accompanied with a trial version of this application.

•Adobe Acrobat (D page 8)

This is an industry-standard application used for creating, managing, and making use of digitalized documents in PDF format.

How to install drivers and applications is described below.

For FUJITSU TWAIN32 Scanner Driver

FUJITSU TWAIN 32 is a TWAIN-compliant scanner driver. To use this scanner with any TWAIN-compatible application, install FUJITSU TWAIN 32, following the procedure below.

■Preparation

Do the following before installing the application:

•Unpack the Setup CD-ROM, but do not insert the Setup CD-ROM into the CD drive yet.

•Connect the scanner correctly to your computer.

HINT

For details on how to connect the scanner, refer to section "2.2 Connecting the Scanner to Your PC" on page 3.

•Uninstall any older versions of FUJITSU TWAIN 32 if they are already installed on your computer.

ATTENTION

Uninstall [Scanner Utility for Microsoft Windows] from [Add/ Remove Programs] on the control panel.

■Installing the FUJITSU TWAIN32 Scanner Driver

HINT

Screenshots taken in Windows XP are used as examples. The displayed windows and operations may slightly vary depending on the operating system you are using.

1.Press the Power button to turn on the scanner.

2.Turn on your computer and log on to Windows.

ATTENTION

Be sure to log on as a user with "Administrator" privileges.

3.When the scanner is automatically detected, [Found New Hardware Wizard] or [Add/Remove Hardware Wizard] dialog box appears. Click [Cancel] to close the Wizard dialog box.

4.Insert the Setup CD-ROM into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

ATTENTION

This screen may not appear if the "AutoPlay" setting is set to off. In this case, find "Install.exe" in the CD-ROM using "Explore" or "My Computer" to start installation.

5