Appendix2 DAILY CARE
When operating the scanner, the ADF’s inside glass becomes very hot.
Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes.
Turn on the scanner when you clean the Feed rollers or Eject rollers.
■Cleaning Materials
| Cleaning | Parts | Remarks | |
| Materials | Number | ||
| |||
|
|
| |
|
|
| |
Cleaner F1 | PA03950- | 1 bottle | |
| 0352 | Moisten the cloth with | |
|
| this fluid and wipe the | |
|
| scanner clean. (*1) | |
|
|
| |
Cleaning wipe | PA03950- | 24 sheets per pack | |
| 0419 | (*1)(*2) | |
|
|
| |
- Commercially available one | |||
|
|
| |
*1: For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.
*2:
■Cleaning Method
The ADF must be cleaned with a
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint- free cloth to leave no residue on the surface of the cleaned parts.
■Locations and Cycle for Cleaning
| Part to clean | Standard Cleaning Cycle | |
|
| |
|
| |
Brake Roller | Clean these parts after every 5,000 | |
| sheets. | |
Pick roller | ||
| ||
|
| |
Feed rollers |
| |
|
| |
Plastic rollers |
| |
|
| |
Eject rollers |
| |
|
| |
Glass |
| |
|
|
ATTENTION
The scanner must be cleaned more frequently if you scan any of the following type of sheets:
•Documents of coated paper
•Documents that are almost completely covered with printed text or graphics
•Chemically treated documents such as carbonless paper
•Documents containing a large amount of calcium carbonate
•Documents written by pencil
•Documents on which the toner is not fused sufficiently.
For details on cleaning the ADF, refer to section 4.3 "Clean- ing the ADF" of