Fujitsu FI-6140, Fi-6240 ■Removable Parts, 1.3 Operator Panel, ■Indications on the Function Number Display, Name, Function, Indication, Descriptions

■Removable Parts

The following shows the parts that can be removed from the scanner.

Can be	ADF paper chute
removed
Brake roller	Can be
	removed

Pick roller

[fi-6240 only]

Document cover

1.3 Operator Panel

The operator panel is located on the right side of the scanner. This panel is comprised of a Function Number Display, four buttons, and a LED.

	Name		Function
Function Number Display			Indicates the Function
			Number and error status.
			For details, refer to
			"Indications on the Function
			Number Display" below.
Buttons		Function	Changes the Function
			activated by the Send to
			button (*).
		Send to	• Launches the linked application
			software (*).
			• Resets an error.
		Scan/Stop	• Launches a linked application
			software.
			• Resets an error.
			• Cancels ongoing scanning.
		Power	Turns on and off the scanner.
LED		Check	Blinks to indicates an error.
		Power	Stays illuminated when the
			scanner is turned on.

*) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help and the "fi-6140/fi-6240 Operator’s Guide" in the Setup CD-ROM.

■Indications on the Function Number Display

Check

Check LED Function Number

Indication	Descriptions
8	Lights only one time upon turning on the

FunctionDisplay

Function button

Send to

	scanner.
P	Indicates that the scanner has been turned

Scan /Stop

Send to button

ON and is being initialized.

Scan/Stop button

Power

Power button/LED

0	Indicates that initialization will soon be
	completed.
1	Indicates that initialization has been
	completed successfully.
	This status is called "Ready Status."
J	Indicates that a recoverable error occurred
U	during scanning with the image scanner.
	"U" or "J" and an "error number" is
	displayed alternately. When an error is
	indicated, press the [Scan] or [Send to]
	button to return to the Ready Status ("1").
E	Indicates that an abnormality (alarm)
F	occurred in the image scanner during its
C	initialization or during scanning.
	"E", "F", "C", "H", "A", or "L" and an
H
	"alarm number" is displayed alternately.
A
	When the alarm number is displayed, press
L	the [Scan] or [Send to] button to return to
	the Ready Status.
	When an alarm is indicated, turn off the
	scanner once, and then turn it on. If the
	alarm persists, contact your service
	engineer, the store where you purchased
	the scanner, or an authorized service
	provider.

fi-6140/fi-6240 Image Scanner Getting Started 2