Silk-Plot of the board | Fujitsu FLASH-CAN-100, FMC-16LX FAMILY

Change odd page title here

Chapter 8 Silk-Plot of the board

8 Silk-Plot of the board

Silk Plot of the new FLASH-CAN2-100P-M06

© Fujitsu Microelectronics Europe GmbH

- 17 -

UG-900001-32

Image 17

Fujitsu FLASH-CAN-100, FMC-16LX FAMILY manual Silk-Plot of the board, Silk Plot of the new FLASH-CAN2-100P-M06

Contents

FMEMCU-UG-900001-32 FLASH-CAN-100 Revision History Schematic of Flash-CAN-100P-M06 misprint External voltage MAX3232CPE No Liability for Consequential Damages Warranty and Disclaimer Contents Overview Connectivity problems of the socket adapterAbstract Introduction Features Supported Microcontroller Series Deliverables MB90470 MB90540 Pin MB90545 MB90550 MB90583 MB90590 MB90595 Configuration of the Evaluation-BoardMB90425 Pin MB90440 Handwire Pin 27 JP10.2 Handwire Pin 28 JP9.2 MB90480 Handwire Pin 88 JP10.2 Handwire Pin 89 JP9.2Handwire Pin 18 JP10.2 Handwire Pin 19 JP9.2 MB90425 Only MB90470series Modifications for use with MB90470 / MB90480 series Schematic of the modifications for MB90470 / MB90480 4,5,6,7,8 OFF Using the Asynchronous Boot-Loader4,6,7,8 OFF Power connector ConnectorsAdditionally Vcc and GND Pins are placed on the board JP11 GND/VCC JP11 Can Interface X2 Uart Silk Plot of the new FLASH-CAN2-100P-M06 Silk-Plot of the board Schematic of the board Related Products Information in the WWW