3.2 Rear Panel
6) | 7) | 13) | 5) 9) | 8) 10) | 11) | 12) |
8 Port Rear Panel
14) |
|
|
|
|
|
|
|
7) | 5) | 9) | 8) | 13) | 10) | 12) | 11) |
4 Port Rear Panel
6) Power cable connector
Connect to a 100 to 240V AC electric outlet.
7) Connectors for hosts [1 through 8]
Connect each port (1 through 8) on this device to the relevant host’s keyboard, mouse and monitor connectors with the special cable.
8)USB keyboard / mouse Connector Connect a USB keyboard / mouse here.
(Cannot be used concurrently with a PS/2 type keyboard and mouse. USB keyboard / mouse have priority over PS/2 keyboard / mouse)
9)USB keyboard / mouse status LEDs
Green: This port can use or using.
Red | : | Over current was drawn from this port. Not in work. |
|
| Unplug the device and push a reset_sw. |
unlit | : | Unsupported device or some error has occurred in this port. |
|
| Unplug the device or push a reset_sw. |
10)PS/2 Keyboard connector Connect a PS/2 keyboard here.
(Cannot be used concurrently with a USB type keyboard)
11)PS/2 Mouse connector
Connect a PS/2 mouse here.
(Cannot be used concurrently with a USB type mouse)
12)Monitor Connector Connect a monitor here.
13)DIP Switches
Use for a variety of settings. Numbered from left side while facing the switches starting from 1,2…8; up is on and down is off.
14) AC adapter connector
Connect the AC adapter here. Do not use any AC adapter other than the one provided with the switch device.
9
