Fujitsu GBR-222200-002 Security Functions of Application Buttons, Setting UP the Security Panel

Osian_UG.book Page 13 Monday, October 9, 2006 1:24 PM

G e t t i n g S t a r t e d

SECURITY FUNCTIONS OF APPLICATION BUTTONS

Five buttons are used when implementing security functions. Four of the buttons are used to enter the password, and the fifth is used as an Enter button. Instructions for using the security feature follow the table.

Button Icons		Security Icons	Security Purpose
			Security Enter Button
Ctl-Alt-Del Button
		1	Security Button 1
EMail Button
		2	Security Button 2
Orientation Button
		3	Security Button 3
Escape Button
		4	Security Button 4
Enter Button
	Table 1-5. Security Functions of Application Buttons

SETTING UP THE SECURITY PANEL

When you receive your Tablet PC, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, how to set, change or remove passwords.

Numbered Buttons

Use these buttons to enter your password.(Figure 1-5)

Enter Button

After entering the button strokes, push this button to enter the password into the Tablet PC. (Figure 1-5)

PASSWORDS

The user and supervisor password may be set on this Tablet PC. A supervisor password is typically the same for all Tablet PC’s and notebooks in a work group, office, or company to allow for system management. Individual computers in a group environment should not use a common password. A password consists of one to five button strokes plus the enter button. A valid stroke consists of pushing one or up to four buttons simulta- neously.

The following are examples of valid button strokes:

■Pushing [4] by itself

■Pushing [2] and [3] at the same time

■Pushing [1], [2], and [4] at the same time

■Pushing [1], [2], [3], and [4] at the same time

The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button.

■{[2]+[3]}, [1], [Enter]

■[4], [enter]

■{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [Enter]

Setting Passwords

When shipped from the factory, no passwords are set. You have a choice of having no password or setting a supervisor and user password. You must set the super- visor password before the user password.

■The purpose of supervisor password is to be able to bypass the user password in case the user password is forgotten. The supervisor password alone will not lock the system.

■You must set the supervisor and user passwords for the security panel to work.

13