Osian_UG.book Page 24 Monday, October 9, 2006 1:24 PM
S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o
■Protect HDD from impact. HDD head is retracted when an impact to the computer is detected.
■Lock computer when carried. Lock the computer when it is being carried.
■Nothing. No action.
Sensitivity of impact/horizontal move/fall/carry detection
Adjust the sensitivity of the acceleration sensor based on system motion or impact.
Ignore periodic vibration.
If vibration is periodic, disregard it.
■Go up. Use [A] key.
■Go down. Use [Z] key.
■Close. Use [Esc] key.
ADJUSTING THE DISPLAY BRIGHTNESS
There are four ways to adjust your display’s brightness:
Depending upon whether you are running your system on battery or AC power, the default screen brightness settings will be different. The screen brightness default for running on battery is lower than that on AC power in order to optimize battery life.
Ignore mouse click
When the mouse is clicked, sensitivity is temporarily lowered.
Ignore keyboard action
When the keyboard is used, sensitivity is temporarily lowered.
Confirm calibration when user logs on
Select [Confirm calibration when user logs on] if you want to recognize the current orientation as horizontal at logon.
Perform calibration automatically when user logs on
Select [Perform calibration automatically when user logs on] if the system is normally used on a horizontal surface.
[Calibrate Now]
The calibration is executed. Please position the computer as horizontally as possible, then click the [Calibrate Now] button. The current horizontal position will be recognized as the true horizontal by performing the calibration.
3.Click the [OK] or [Cancel] button. The [Setup] window closes.
Using the Shock Sensor Monitor Window
Note that the Monitor is designed for entertainment, and has no effect on system settings or orientation. To navigate the monitor, use the buttons described below.
■Advance. Incline the display to the hinge side, or use [Up] key.
■Back. Incline the display to the
■Right. Incline the display to the right side, or use [Right] key.
■Left. Incline the display to the left side, or use [Left] key.
■Click the Tablet icon in the system tray at the bottom right of the screen. (When the cursor is on top of the icon, a message stating “Change tablet and pen set- tings” is displayed.) When the Tablet and Pen Settings window appears, select the Display tab, and move the Screen Brightness slider to change the brightness.
■Click Start
■Click the Fujitsu Menu icon in the system tray at the bottom right of the screen. (When the cursor is on top of the icon, a message stating “Fujitsu Menu...” is dis- played.) Select Tablet and Pen Settings and select the Display tab. Move the Screen Brightness slider to change the brightness.
■Press the Fn key twice to invoke the Fujitsu menu and select Tablet and Pen Settings.
USING THE PEN
You can use the Stylistic ST5100 Series pen to generate and create electronic “ink”, to select items, and to navi- gate through programs on the Tablet PC. Programs that support handwriting recognition also allow you to write characters directly on the screen with the pen. You can also use the pen as a drawing tool.
Barrel Switch | Eraser Switches |
Tip Switch
Pen Tether Attachment Point
Figure 2-1. Stylistic ST5100 Series Pen
24
