Fujitsu LT800P warranty Checking the Connectivity, Table A-11 Checking connectivity

U s i n g t h e W i r e l e s s L A N

Checking the Connectivity

1.Click [Start] -> [Control Panel].

2.Double-click the [PRISM Settings] icon. [PRISM Wireless Setting] appears.

3.Check the connectivity on the [Link] tab. The current condition of connection is displayed.

Item	Description
	Shows the current condition of connection.
State	The MAC address of the other computer that you are connected
	to is displayed, when the connection is successfully made. If you
	are connected to more than one computer, the computer that has
	the best connectivity is displayed.
Current Channel	Shows the current channel used for the connection.
Current Tx Rate	Shows the current transfer rate in Mbits/sec.
Radio Off/Radio	Click [Radio OFF] to disconnect.
On	Click [Radio On] to connect to the network.
Rescan	Click this button to search for others to connect to.
Throughput	Shows the actual transfer rate of the transfer data for send (Tx)
(Bytes/sec)	and receive (Rx).
Link Quality	Shows the link quality. This is not shown for the AdHoc connec-
	tion.
Signal Strength	Shows the signal strength.
	This is not shown for the AdHoc connection.
	Table A-11 Checking connectivity

87