Fujitsu LT800P warranty Table A-2 Encryption Key Setup, Wep

U s i n g t h e W i r e l e s s L A N

Item		Description
	Click the down arrow and select an encryption option.
	■	Disable: Disables the encryption. In this case, “Create keys with
		Passphrase” and subsequent items are greyed out, and you
		cannot enter anything.
Encryption	■	40 bit*: The encryption is set. Select either “Create keys with
(WEP)		Passphrase”, “Create keys manually”, or “ASCII Input”, and
		enter the encryption keys.
	■	104 bit*: The encryption is set. Select either “Create keys with
		Passphrase”, “Create keys manually”, or “ASCII Input”, and
		enter the encryption keys.
Create Keys with	Not supported.
Passphrase
Passphrase	Not supported.
	Select this to use hexadecimal character codes to set the
	encryption keys (Keys 1 - 4).
Create Keys	Enter a 10-digit value when you have selected [40 bit]* for the
	encryption. Enter a 26-digit value when you have selected [104
Manually
	bit]* for encryption.
(Hexadecimal
	Select if the network contains a card that is set with the
Input)
	encryption key using the character code. Specify the encryption
	keys with the same value used for other wireless LAN cards that
	are already set.
	Select to use the ASCII codes to set encryption keys (Keys 1 - 4).
	Select this if network does not contain other wireless LAN cards
	that are set with encryption key using character codes.
	Enter a 5-digit value when you have selected [40 bit]* for the
ASCII Input	encryption. Enter a 13-digit value when you have selected [104
	bit]* for encryption.
	You can use the following characters: 0 - 9, A - Z, a - z, _ (under-
	score).
	For example, to set “ABC12” for the encryption key, enter
	“ABC12.”
Default Key	Click the down arrow, and select a key from Keys 1 - 4.

Table A-2 Encryption Key Setup

73