Fujitsu LT800P warranty If the connection is successful

U s i n g t h e W i r e l e s s L A N

Problem	Possible Cause		Possible Solution
IP packet isn’t		Example: if the destination IP address is
reaching its		10.0.1.3:
destination		C:\>ping 10.0.1.3
(continued)		A message similar to the following appears
		if the connection is successful.
		Pinging 10.0.1.3 with 32 bytes of data:
		Reply from 10.0.1.3: bytes=32 time=1ms
		TTL=32
		Reply from 10.0.1.3: bytes=32 time<10ms
		TTL=32
		Reply from 10.0.1.3: bytes=32 time=4ms
		TTL=32
		Reply from 10.0.1.3: bytes=32 time<10ms
		TTL=32
		If the connection fails, [Request timed
		out], [Destination host unreachable], or a
		similar message appears. In this case, refer
		to the “Other computers are not
		displayed” portion of this chapter.
Cannot connect to	There are several	The following causes are possible. Check
the network	possible causes, as	each one of them.
	listed to the right.	■	The network name or encryption key
	Refer to the
			is not right.
	specific section of
		■	The driver has not correctly started.
	this manual or your
		■	The destination computer is not
	user’s manual.
			turned on.
		■	You do not have the access privilege
			to the destination computer.
		■	The card has failed.
		■	Hardware conflict.

91