4.2.3Reading a document larger than the document board
If the size of the document is larger than the document board, read the document using the following procedure:
①Open the document cover at an angle of about 80°, then slide the cover to the direction of the arrow to remove it.
②Place the document face down on the document bed.
③Place the document cover over the document.
④Instruct the scanner to start scanning from the host computer.
⑤After the read operation, remove the document, replace the document cover. Mount the document cover to the original position, and close the document cover.
Document cover
80°
Document bed
Figure 4.2 Removing the document cover
NOTICE: Do not remove the document cover for any other purpose.
4 – 4
