Radio Shack 43-5829 manual Installing a Belt Clip, Using a Headset, To attach the belt clip

Models: 43-5829

1 111
Download 111 pages 63.96 Kb
Page 25
Image 25

The Basics

WARNING: Dispose of the old battery pack promptly and properly.

Do not burn or bury it. Dispose of used batteries according to the instructions.

Danger! Risk of explosion if battery is replaced by an incorrect type.

Installing a Belt Clip

To attach the belt clip

Insert the belt clip into the holes on each side of the handset. Press down until it clicks.

To remove the belt clip

Pull either side of the belt clip to release the tabs from the holes.

Using a Headset

You can make or answer calls handsfree using an optional headset that has a 3/32-inch (2.5-mm) plug. RadioShack has a variety of headsets available.

1.To connect the headset, gently flip open the rubber headset jack cover on the side of the handset. Then insert the headset’s plug into the jack.

2.Use the VOL/RING/ or VOL/RING/ on the handset to adjust the headset’s volume.

3.With a headset connected, you can make or answer calls as usual using the keys on the handset.

25

Page 25
Image 25
Radio Shack 43-5829 manual Installing a Belt Clip, Using a Headset, To attach the belt clip, To remove the belt clip