Beyond the Basics
From the base | From the handset |
1.Press MENU/CLOCK 1. Press MENU/CLEAR.
four times. The base |
| Select the ANSW. | |
displays the current |
| SETUP menu, and | |
number of rings |
| then the RECORD | |
recording time (1 |
| TIME submenu. | |
minute, 4 minutes, or | 2. | Move the cursor | |
A for announce only) |
| to select RECORD | |
and announces the |
| ||
| TIME (1 MINUTE, | ||
setting. |
| ||
| 4 MINUTES, or | ||
2. Press /select or |
| ||
| ANNOUNCE ONLY). | ||
/select until the | 3. | Press SELECT/ . | |
desired message | |||
| You will hear a | ||
record time appears. |
| ||
| confirmation tone. | ||
|
|
3.Press SET to select the new recording time. A confirmation tone sounds, and the system announces the new record time.
While your answering system is set to Announce Only, the message counter LED on the base displays “A.” If you are using the prerecorded greeting, the system automatically switches to the following message: “Hello, no one is available to take your call. Please call again.” If you are using a personal greeting, the system continues to use that greeting.
83