JVC GR-HD1, LYT1154-001C How To Attach The Core Filter, Types of core filters Size Cable Times to

EN 9

How To Attach The Core Filter

Attach the core filters to the cables. The core filter reduces interference.

Types of core filters

Size	Cable	Times to
		wind
Large	i.LINK cable*	Twice
	USB cable**	Once
Medium
	Component video	—
	cable***
Small	DC cord	Once
	Audio cable

*Optional

(If you have an optional JVC i.LINK cable VC-VDV206U or VC-VDV204U with core filters, it is not necessary to attach the provided core filter. If you are going to use any other i.LINK cable, attach the provided core filter.)

**Attach two core filters to both ends of the cable.

***Not necessary to wind the cable.

The procedure below is an example of winding cable once.

1Release the stoppers on both ends of the core filter.

Stopper

2Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable once around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3 cm

Wind once.

3Close the core filter until it clicks shut.

To attach the core filter to the component video cable

1)Release the stoppers on both ends of the core filter.

2)Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter.

3cm

3)Close the core filter until it clicks shut.

NOTES:

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.